IC Alcor Micro

Спецификации на контроллеры Alcor Micro

USB Flash Disk Controller

AU87100 – USB 3.0 Universal Flash Disk Controller

> Description:
The AU87100 USB 3.0 Flash Disk Controller is a high performance solution for SLC, MLC, TLC SDR/DDR NAND flash, and provides high capacity with multiple die flash support. AU87100 has 72bit/1K BCH ECC engines to correct high error bits NAND flash to ensure the data accuracy.
AU87100 provides single channel access and ISP (In-System Programming) technologies with Alcor’s patented features, which are the fastest & most flexible features to allow manufacturers building high performance UFD to easily configure and test & to have highest flexibility of different configuration sources of flash chips.
– USB3.0 Interface
– Single channel access
– BCH 72bit/1K ECC
– Embedded Crystal design
– Embedded Regulator
– Supports ONFI/Toggle DDR
– Supports1.8V/ 3.3V NAND flash
– Supports 4KB/8KB/16KB page size flash
– Supports SanDisk/Toshiba 1ynm/19nm/24nm MLC, TLC DDR flash
– Supports Samsung 19nm/21nm/27nm MLC,TLC DDR flash
– Supports Micron/Intel 16nm/20nm/25nm MLC DDR flash(L7x/L8X/L9x series)
– Supports Hynix 16nm/20nm MLC DDR flash

> Main Features:
– USB3.0 Super Speed interface
– Single channel access
– Crystal-less design
– Integrated build-in Regulator
– 1.2V low power operation
– NAND Flash Support
– – 72 bit/1K BCH ECC engine
– – ONFI/Toggle DDR interface
– – 1.8V/ 3.3V NAND flash
– – SLC, MLC, TLC with 4KB/8KB/16KB page size
– – 1xnm, 1ynm new generation NAND flash
– – 2-way, and 4-way interleave operation
– – Bad Block Management
– Operating System Support
– – Windows: Win 2000, Win XP, Vista, Win7, Win8, Win8.1, Win 8 RT
– – Mac OS 10.x
– – Linux: Fedora, Ubuntu
– – Android OS
– Supports software Write Protect function
– Supports auto run function
– Erasable AP Disk and Read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key


AU6990 – USB 2.0 Universal Flash Disk Controller

> Description:
The AU6990 USB 2.0 Flash Disk Controller is the best high performance solutions for SLC, MLC, TLC NAND and AG-AND with multiple dies data flash. Its high-speed read (32MB/Sec) and write access performance enable users to transfer and backup data effectively. Besides, AU6990 is certified by USB-IF (USB Implementers Forum), WHQL (Window Hardware Quality Labs) and EMI tests to guarantee the quality and reliability for end-users.
With multiple functions integrated into one chip and external components built inside, AU6990 is pledged to deliver the best performance benchmark and to further reduce the BOM cost of end products adopting this solution. It provides dual channel access and ISP (In-System Programming) technologies, which are the most important features to allow manufacturers building high performance UFD easily and to have the flexibility of adopting different source of flash chips. Same as its siblings of product family, AU6990 features the auto-run function to prompt the designated AP automatically when plugging into PC. In addition to being as a removable storage device, AU6990 can also be configured as a bootable disk for system recovery. Also, its random access performance exceed the minimum requirement of Read Boost feature found in Microsoft Vista operating system, in which randomly access blocks of information are saved into UFD for boosting up the average performance.
To enhance the usefulness and manageability of UFD further, Alcor Micro develops a smart application program iStar (Partition/Password Operation Tool) as a handy utility in managing partition, password and security. Having iStar as the companion of UFD, the data in a UFD could be protected from unauthorized access successfully.

> Main Features:
– PCBs are pin compatible in AU6980, AU6981, AU6982, AU6983, AU6984, AU6986, AU6986T.
– Integrate build-in regulator
– 30bit/1024Bytes BCH ECC engines
– Supports SLC , MLC and TLC dual channel with high performance
– Improve read performance reach 32MB/Sec
– Supports firmware upgrade mechanism(ISP, In-System Programming)
– Integrates hardware DMA engine to tune up the operation performance
– Integrates multi-bit ECC correction mechanism
– Complies with the standards defined in USB v2.0, USB Device Class Definition for Mass Storage and Bulk-Transport v1.0
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE
– Concurrent bus operation using multiple FIFO for better performance
– Integrates into flash memory power control switch
– Supports bad block management
– Supports dynamic serial number modification via mass production software
– Supports software write protection
– Support Auto Run function
– Support erasable and read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key
– Available in 48-pin LQFP 7x7mm package to support 4CE pin flashx2pcs
– Available in 64-pin LQFP 7x7mm package to support 4CE pin flashx4pcs


AU6990AN – USB 2.0 Universal Flash Disk Controller

> Description:
The AU6990AN(embedded Crystal) USB 2.0 Flash Disk Controller is the best high performance solutions for SLC, MLC, TLC NAND and AG-AND with multiple dies data flash. Its high-speed read (32MB/Sec) and write access performance enable users to transfer and backup data effectively. Besides, AU6990AN is certified by USB-IF (USB Implementers Forum), WHQL (Window Hardware Quality Labs) and EMI tests to guarantee the quality and reliability for end-users.
With multiple functions integrated into one chip and external components built inside, AU6990AN is pledged to deliver the best performance benchmark and to further reduce the BOM cost of end products adopting this solution. It provides dual channel access and ISP (In-System Programming) technologies, which are the most important features to allow manufacturers building high performance UFD easily and to have the flexibility of adopting different source of flash chips. Same as its siblings of product family, AU6990AN features the auto-run function to prompt the designated AP automatically when plugging into PC. In addition to being as a removable storage device, AU6990AN can also be configured as a bootable disk for system recovery. Also, its random access performance exceed the minimum requirement of Read Boost feature found in Microsoft Vista operating system, in which randomly access blocks of information are saved into UFD for boosting up the average performance.
To enhance the usefulness and manageability of UFD further, Alcor Micro develops a smart application program iStar (Partition/Password Operation Tool) as a handy utility in managing partition, password and security. Having iStar as the companion of UFD, the data in a UFD could be protected from unauthorized access successfully.

> Main Features:
– PCBs are pin compatible with AU699X series.
– Integrated build-in regulator
– Integrated build-in crystal
– 30bit/1024Bytes BCH ECC engines
– Supports SLC , MLC and TLC dual channel with high performance
– Improve read performance reach 32MB/Sec
– Supports firmware upgrade mechanism(ISP, In-System Programming)
– Integrates hardware DMA engine to tune up the operation performance
– Integrates multi-bit ECC correction mechanism
– Complies with the standards defined in USB v2.0, USB Device Class Definition for Mass Storage and Bulk-Transport v1.0
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Window7, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE
– Concurrent bus operation using multiple FIFO for better performance
– Integrates into flash memory power control switch
– Supports bad block management
– Supports dynamic serial number modification via mass production software
– Supports software write protection
– Support Auto Run function
– Support erasable and read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key
– Available in 48-pin LQFP 7x7mm package to support 4CE pin flashx2pcs
– Available in 64-pin LQFP 7x7mm package to support 4CE pin flashx4pcs


AU6998 – USB 2.0 Universal Flash Disk Controller

> Description:
The AU6998 USB 2.0 Flash Disk Controller is the best high performance solutions for SLC, MLC, TLC NAND, EF_Nand especial Toggle/ONFI DDR flash. AU6998 has fully 72bit/1K BCH ECC engines to correct high error bits of new generation flash and provide the well performance for TLC flash.
AU6998 provides dual channel access and ISP (In-System Programming) technologies, which are the most important features to allow manufacturers building high performance UFD easily and to have the flexibility of adopting different source of flash chips.
To enhance the usefulness and manageability of UFD further, Alcor Micro develops a smart application program iStar (Partition/Password Operation Tool) as a handy utility in managing partition, password and security. Having iStar as the companion of UFD, the data in a UFD could be protected from unauthorized access successfully.

> Main Features:
– PCBs are pin compatible with AU6986T, AU6990, AU6990T, AU6998NL
– Integrate build-in regulator.
– 72bit/1K BCH ECC engines
– Supports SLC, MLC and TLC dual channel and Toggle/ONFI2.2 single channel
– Support Toshiba/SanDisk D3/eD3 flash with dual channel
– Well performance in TLC flash
– Improve read performance reach 32MB/Sec
– Integrates hardware DMA engine to tune up the operation performance
– Complies with the standards defined in USB v2.0, USB Device Class Definition for Mass Storage and Bulk-Transport v1.0
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Vista, Window7, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE
– Concurrent bus operation using multiple FIFO for better performance
– Integrates into flash memory power control switch
– Supports dynamic serial number modification via mass production software
– Supports software write protection
– Support Auto Run function
– Support erasable and read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key
– Available in 48-pin LQFP 7x7mm package to support 4CE pin flashx2pcs
– Available in 64-pin LQFP 7x7mm package to support 4CE pin flashx4pcs


AU6998L – USB 2.0 Universal Flash Disk Controller

> Description:
The AU6998L USB 2.0 Flash Disk Controller is the best high performance solutions for SLC, MLC, TLC NAND, EF_Nand. AU6998L has fully 44bit/1K BCH ECC engines to correct high error bits of new generation flash and provide the well performance for TLC flash.
AU6998L provides dual channel access and ISP (In-System Programming) technologies, which are the most important features to allow manufacturers building high performance UFD easily and to have the flexibility of adopting different source of flash chips.
To enhance the usefulness and manageability of UFD further, Alcor Micro develops a smart application program iStar (Partition/Password Operation Tool) as a handy utility in managing partition, password and security. Having iStar as the companion of UFD, the data in a UFD could be protected from unauthorized access successfully.

> Main Features:
– PCBs are pin compatible with AU69XX series.
– Integrate build-in regulator.
– 44bit/1K BCH ECC engines
– Supports SLC, MLC and TLC dual channel.
– Support Micron/INTEL 21nm L83, L84 MLC Flash memory
– Well performance in TLC flash
– Improve read performance reach 32MB/Sec
– Integrates hardware DMA engine to tune up the operation performance
– Complies with the standards defined in USB v2.0, USB Device Class Definition for Mass Storage and Bulk-Transport v1.0
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Vista, Window7, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE
– Concurrent bus operation using multiple FIFO for better performance
– Integrates into flash memory power control switch
– Supports dynamic serial number modification via mass production software
– Supports software write protection
– Support Auto Run function
– Support erasable and read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key
– Available in 48-pin LQFP 7x7mm package to support 4CE pin flashx2pcs
– Available in 64-pin LQFP 7x7mm package to support 4CE pin flashx4pcs


AU6998N – USB 2.0 Universal Flash Disk Controller

> Description:
The AU6998N (embedded Crystal) USB 2.0 Flash Disk Controller is the best high performance solutions for SLC, MLC, TLC NAND, EF_Nand and DDR with multiple dies data flash. AU6998N has 72bit/1K BCH ECC engines to correct high error bits of new generation flash and provide the well performance for DDR mode.
AU6998N provides dual channel access and ISP (In-System Programming) technologies, which are the most important features to allow manufacturers building high performance UFD easily and to have the flexibility of adopting different source of flash chips.
To enhance the usefulness and manageability of UFD further, Alcor Micro develops a smart application program iStar (Partition/Password Operation Tool) as a handy utility in managing partition, password and security. Having iStar as the companion of UFD, the data in a UFD could be protected from unauthorized access successfully.

> Main Features:
– PCBs are pin compatible with AU699X series.
– Integrate build-in Regulator
– Integrate build-in Crystal
– 72bit/1K BCH ECC engines
– Supports SLC , MLC and TLC, EF_Nand dual channel with high performance
– Support DDR High performance with single channel only.
– Well performance in TLC flash
– Improve read performance reach 32MB/Sec
– Integrates hardware DMA engine to tune up the operation performance
– Complies with the standards defined in USB v2.0, USB Device Class Definition for Mass Storage and Bulk-Transport v1.0
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Vista, Window7, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE
– Concurrent bus operation using multiple FIFO for better performance
– Integrates into flash memory power control switch
– Supports dynamic serial number modification via mass production software
– Supports software write protection
– Support Auto Run function
– Support erasable and read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key
– Available in 48-pin LQFP 7x7mm package to support 4CE pin flashx2pcs
– Available in 64-pin LQFP 7x7mm package to support 4CE pin flashx4pcs


AU6998NL – USB 2.0 Universal Flash Disk Controller

> Description:
The AU6998NL (embedded Crystal) USB 2.0 Flash Disk Controller is the best high performance solutions for SLC, MLC, TLC NAND, EF_Nand and AG-AND with multiple dies data flash. AU6998NL has 44bit/1K BCH ECC engines to correct high error bits of new generation flash and provide the well performance for TLC flash especial Samsung 32nm TLC.
AU6998NL provides dual channel access and ISP (In-System Programming) technologies, which are the most important features to allow manufacturers building high performance UFD easily and to have the flexibility of adopting different source of flash chips.
To enhance the usefulness and manageability of UFD further, Alcor Micro develops a smart application program iStar (Partition/Password Operation Tool) as a handy utility in managing partition, password and security. Having iStar as the companion of UFD, the data in a UFD could be protected from unauthorized access successfully.

> Main Features:
– PCBs are pin compatible with AU6985, AU6987, AU6987T, AU6998.
– Integrate build-in Regulator
– Integrate build-in Crystal
– 44bit/1K BCH ECC engines
– Supports SLC , MLC and TLC, EF_Nand dual channel with high performance
– Well performance in TLC flash
– Improve read performance reach 32MB/Sec
– Integrates hardware DMA engine to tune up the operation performance
– Complies with the standards defined in USB v2.0, USB Device Class Definition for Mass Storage and Bulk-Transport v1.0
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Vista, Window7, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE
– Concurrent bus operation using multiple FIFO for better performance
– Integrates into flash memory power control switch
– Supports dynamic serial number modification via mass production software
– Supports software write protection
– Support Auto Run function
– Support erasable and read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key
– Available in 48-pin LQFP 7x7mm package to support 4CE pin flashx2pcs
– Available in 64-pin LQFP 7x7mm package to support 4CE pin flashx4pcs


AU6998ANL – USB 2.0 Universal Flash Disk Controller

> Description:
The AU6998ANL (embedded Crystal) USB 2.0 Flash Disk Controller is the best high performance solutions for SLC, MLC, TLC NAND, EF_Nand and AG-AND with multiple dies data flash. AU6998ANL has 44bit/1K BCH ECC engines to correct high error bits of new generation flash and provide the well performance for TLC flash especial Samsung 32nm TLC.
AU6998ANL provides dual channel access and ISP (In-System Programming) technologies, which are the most important features to allow manufacturers building high performance UFD easily and to have the flexibility of adopting different source of flash chips.
To enhance the usefulness and manageability of UFD further, Alcor Micro develops a smart application program iStar (Partition/Password Operation Tool) as a handy utility in managing partition, password and security. Having iStar as the companion of UFD, the data in a UFD could be protected from unauthorized access successfully.

> Main Features:
– PCBs are pin compatible with AU6985, AU6987, AU6987T, AU6998.
– Integrate build-in Regulator
– Integrate build-in Crystal
– 44bit/1K BCH ECC engines
– Supports SLC , MLC and TLC, EF_Nand dual channel with high performance
– Well performance in TLC flash
– Improve read performance reach 32MB/Sec
– Integrates hardware DMA engine to tune up the operation performance
– Complies with the standards defined in USB v2.0, USB Device Class Definition for Mass Storage and Bulk-Transport v1.0
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Vista, Window7, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE
– Concurrent bus operation using multiple FIFO for better performance
– Integrates into flash memory power control switch
– Supports dynamic serial number modification via mass production software
– Supports software write protection
– Support Auto Run function
– Support erasable and read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key
– Available in 48-pin LQFP 7x7mm package to support 4CE pin flashx2pcs
– Available in 64-pin LQFP 7x7mm package to support 4CE pin flashx4pcs


AU6998AN – USB 2.0 Universal Flash Disk Controller

> Description:
The AU6998AN (embedded Crystal) USB 2.0 Flash Disk Controller is the best high performance solutions for SLC, MLC, TLC NAND, EF_Nand and DDR with multiple dies data flash. AU6998AN has 72bit/1K BCH ECC engines to correct high error bits of new generation flash and provide the well performance for DDR mode.
AU6998AN provides dual channel access and ISP (In-System Programming) technologies, which are the most important features to allow manufacturers building high performance UFD easily and to have the flexibility of adopting different source of flash chips.
To enhance the usefulness and manageability of UFD further, Alcor Micro develops a smart application program iStar (Partition/Password Operation Tool) as a handy utility in managing partition, password and security. Having iStar as the companion of UFD, the data in a UFD could be protected from unauthorized access successfully.

> Main Features:
– PCBs are pin compatible with AU699X series.
– Integrated build-in Regulator
– Integrated build-in Crystal
– 72bit/1K BCH ECC engines
– Supports SLC , MLC and TLC, EF_Nand dual channel with high performance
– Support DDR High performance with single channel only.
– Well performance in TLC flash
– Improve read performance reach 32MB/Sec
– Integrates hardware DMA engine to tune up the operation performance
– Complies with the standards defined in USB v2.0, USB Device Class Definition for Mass Storage and Bulk-Transport v1.0
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Vista, Window7, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE
– Concurrent bus operation using multiple FIFO for better performance
– Integrates into flash memory power control switch
– Supports dynamic serial number modification via mass production software
– Supports software write protection
– Support Auto Run function
– Support erasable and read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key
– Available in 48-pin LQFP 7x7mm package to support 4CE pin flashx2pcs
– Available in 64-pin LQFP 7x7mm package to support 4CE pin flashx4pcs


AU6998SN – USB 2.0 Universal Flash Disk Controller

> Description:
The AU6998SN (embedded Crystal) USB 2.0 Flash Disk Controller is the best high performance solutions for SLC, MLC, TLC NAND, EF_Nand and DDR with multiple dies data flash. AU6998SN has 72bit/1K BCH ECC engines to correct high error bits of new generation flash and provide the well performance for DDR mode. Especially for 16K/page flash support.
To enhance the usefulness and manageability of UFD further, Alcor Micro develops a smart application program iStar (Partition/Password Operation Tool) as a handy utility in managing partition, password and security. Having iStar as the companion of UFD, the data in a UFD could be protected from unauthorized access successfully.

> Main Features:
– PCBs are pin compatible with AU699X series.
– Integrated build-in Regulator
– Integrated build-in Crystal
– 72bit/1K BCH ECC engines
– Supports 2K/4K/8K/16KB per page flash
– Support DDR High performance with single channel
– Well performance in TLC flash
– Enhanced read performance reach 32MB/Sec
– Integrates hardware DMA engine to tune up the operation performance
– Complies with the standards defined in USB v2.0, USB Device Class Definition for Mass Storage and Bulk-Transport v1.0
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE
– Concurrent bus operation using multiple FIFO for better performance
– Integrates into flash memory power control switch
– Supports dynamic serial number modification via mass production software
– Supports software Write Protect function
– Support Auto Run function
– Support erasable and read-only mode AP Disk
– Companion application program with UFD – iStar available for users
– – To have UFD partition management function
– – To do password protection for the security in data access
– – To guard data files with software write protection function
– – To lock up PC by UFD as the key
– Available in 48-pin LQFP 7x7mm package to support 4CE pin flashx2pcs
– Available in 64-pin LQFP 7x7mm package to support 4CE pin flashx4pcs


SD Card Controller

AU7310T – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7310T single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7310T supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7310T exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7310T offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7310T supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.

> Main Features:
1.Host Interface (SD card)
– Compliant with SD specifications version 2.x/3.0x (UHS104)
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 208MHz
– Support different data bus width x1, x4
– Support high capacity SDHC / SDXC card (>2GB ~32GB / > 32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)
– Bus speed Mode:
– DS, Default speed mode: 3.3V signaling, frequency up to 25 MHz, up to 12.5 MB/sec
– HS, High-Speed mode: 3.3V signaling, frequency up to 50 MHz, up to 25 MB/sec
– SDR12: 1.8V signaling, frequency up to 25 MHz, up to 12.5 MB/sec
– SDR25: 1.8V signaling, frequency up to 50 MHz, up to 25 MB/sec
– SDR50: 1.8V signaling, frequency up to 100 MHz, up to 50 MB/sec
– SDR104: 1.8V signaling, frequency up to 208 MHz, up to 104 MB/sec
– DDR50: 1.8V signaling, frequency up to 50 MHz, sampled on both clock edges, up to 50MB/sec

2.Flash Memory Interface
– Direct interface to NAND flash chips
– Supports following latest generation flash, including MLC / TLC
– – Hynix 20/16nm flash
– – Micron/Intel 25/20/1xnm flash
– – Toshiba 19/A19nm flash
– – SanDisk 19/1Ynm flash
– – Samsung 21/19nm flash
– Supports ONFI 2.x Interface Specification and Standard command set
– Supports Toggle Mode 1.0 NAND flash
– Supports 8KB/16KB page type flash
– Supports 3.3V flash
– Supports single channel 8 bit flash interface with 8CE and 2 R/B pins
– Supports two plane operation
– Supports 2/4-way interleave operation
– Talent BCH ECC algorithm for randomly 72 bit error detection and correction per 1KB
– Integrates hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Supports bad block management
– Supports dynamic serial number modification via mass production software
– Supports software write protection

3.Micro Controller and Analog IP
– Embedded Turbo 8051 CPU
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.5 voltage Regulator for core
– Embedded BCH up to 72bits per 1KB ECC Engine

4.Technology
– 0.11 um logic process
– 2.7 ~ 3.6 volts operating voltage

5.Product Packages
– 55-pad bare die


AU7648A – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7648A single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7648A supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7648A exhibits high performance data transfer speed in accessing SLC/MLC NAND flash.
In addition to the performance and compatibility benefits, AU7648A offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7648A supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7648A is available in either 53-pin LGA package or in bare die format. AU7648A is available for downgrade flash market.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification V1.0 / V1.1 / V2.0.
– Support command class 0, 2, 4, 5, 6, 7, 8 and 10.
– Support SPI communication protocol.
– Support clock frequency 0 ~ 50 MHz.
– Support different data bus width x1, x4.
– Support standard capacity SD card (<=2GB). – Support high capacity SDHC card (>2GB ~ 32GB).
– Support Content Protection for Recordable Media (CPRM) for SD audio.
– Support vendor command for the development of special applications.
– Support firmware upgrade mechanism (ISP, In-System Programming).

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung / Toshiba / Renesas / IM / Micron / Intel / ST / Hynix)
– Support SLC/MLC(NOP=1) flash
– Support 1Gb / 2Gb / 4Gb / 8Gb / 16Gb / 32Gb flash chips.
– Support two plane operation.
– Support 4KB / 8KB page type flash.
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 4 CE and 2 R/B pins.
– Talent BCH ECC algorithm for randomly 8/15 bit error detection and correction per sector (528 bytes)
– Integrate hardware DMA engine to tune up the operation performance.
– Concurrent bus operation using multiple FIFO for better performance.
– Support bad block management.
– Support dynamic serial number modification via mass production software.
– Support software write protection.

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051.
– Embedded RAM and ROM.
– Built-in power on reset.
– Built-in programmable OSC.
– Built-in 1.8V regulator for core.
– Embedded 8-bits correction ECC function.

4. Technology:
– 0.16 um logic process.
– 2.7 ~ 3.6V operating voltage.

5. Product Packages:
– 51-pad bare die.
– 53-LGA package.


AU7648B – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7648B single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7648B supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7648B exhibits high performance data transfer speed in accessing SLC/MLC NAND flash.
In addition to the performance and compatibility benefits, AU7648B offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7648B supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7648B is available in either 53-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification V1.0 / V1.1 / V2.0.
– Support command class 0, 2, 4, 5, 6, 7, 8 and 10.
– Support SPI communication protocol.
– Support clock frequency 0 ~ 50 MHz.
– Support different data bus width x1, x4.
– Support standard capacity SD card (<=2GB). – Support high capacity SDHC card (>2GB ~ 32GB).
– Support Content Protection for Recordable Media (CPRM) for SD audio.
– Support vendor command for the development of special applications.
– Support firmware upgrade mechanism (ISP, In-System Programming).

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung / Toshiba / Renesas / IM / Micron / Intel / ST / Hynix)
– Support SLC/MLC(NOP=1) flash
– Support 1Gb / 2Gb / 4Gb / 8Gb / 16Gb / 32Gb flash chips.
– Support two plane operation.
– Support 2KB / 4KB page type flash.
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 4 CE and 2 R/B pins.
– Talent BCH ECC algorithm for randomly 8/15 bit error detection and correction per sector (528 bytes)
– Integrate hardware DMA engine to tune up the operation performance.
– Concurrent bus operation using multiple FIFO for better performance.
– Support bad block management.
– Support dynamic serial number modification via mass production software.
– Support software write protection.

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051.
– Embedded RAM and ROM.
– Built-in power on reset.
– Built-in programmable OSC.
– Built-in 1.8V regulator for core.
– Embedded 8-bits correction ECC function.

4. Technology:
– 0.16 um logic process.
– 2.7 ~ 3.6V operating voltage.

5. Product Packages:
– 51-pad bare die.
– 53-LGA package.


AU7652 – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7652 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7652 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7652 exhibits high performance data transfer speed in accessing SLC/MLC NAND flash.
In addition to the performance and compatibility benefits, AU7652 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7652 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7652 is available in either 53-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification V1.0 / V1.1 / V2.0.
– Support command class 0, 2, 4, 5, 6, 7, 8 and 10.
– Support SPI communication protocol.
– Support clock frequency 0 ~ 50 MHz.
– Support different data bus width x1, x4.
– Support standard capacity SD card (<=2GB). – Support high capacity SDHC card (>2GB ~ 32GB).
– Support Content Protection for Recordable Media (CPRM) for SD audio.
– Support vendor command for the development of special applications.
– Support firmware upgrade mechanism (ISP, In-System Programming).

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung / Toshiba / Renesas / IM / Micron / Intel / ST / Hynix)
– Support SLC/MLC/TLC flash
– Support 1Gb / 2Gb / 4Gb / 8Gb / 16Gb / 32Gb flash chips.
– Support two plane operation.
– Support 4KB / 8KB page type flash.
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 4 CE and 2 R/B pins.
– Talent BCH ECC algorithm for randomly 16/24/30 bit error detection and correction per sector (1K bytes)
– Integrate hardware DMA engine to tune up the operation performance.
– Concurrent bus operation using multiple FIFO for better performance.
– Support bad block management.
– Support dynamic serial number modification via mass production software.
– Support software write protection.

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051.
– Embedded RAM and ROM.
– Built-in power on reset.
– Built-in programmable OSC.
– Built-in 1.8V regulator for core.
– Embedded 8-bits correction ECC function.

4. Technology:
– 0.16 um logic process.
– 2.7 ~ 3.6V operating voltage.

5. Product Packages:
– 68-pad bare die.
– 53-LGA package.


AU7653 – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7653 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7653 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7653 exhibits high performance data transfer speed in accessing SLC/MLC NAND flash.
In addition to the performance and compatibility benefits, AU7653 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7653 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7653 is available in either 53-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification V1.0 / V1.1 / V2.0.
– Support command class 0, 2, 4, 5, 6, 7, 8 and 10.
– Support SPI communication protocol.
– Support clock frequency 0 ~ 50 MHz.
– Support different data bus width x1, x4.
– Support standard capacity SD card (<=2GB). – Support high capacity SDHC card (>2GB ~ 32GB).
– Support Content Protection for Recordable Media (CPRM) for SD audio.
– Support vendor command for the development of special applications.
– Support firmware upgrade mechanism (ISP, In-System Programming).

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung / Toshiba / Renesas / IM / Micron / Intel / ST / Hynix)
– Support SLC/MLC/TLC flash
– Support 1Gb / 2Gb / 4Gb / 8Gb / 16Gb / 32Gb flash chips.
– Support two plane operation.
– Support 4KB / 8KB page type flash.
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 4 CE and 2 R/B pins.
– Talent BCH ECC algorithm for randomly 16/24/30 bit error detection and correction per sector (1024 bytes)
– Integrate hardware DMA engine to tune up the operation performance.
– Concurrent bus operation using multiple FIFO for better performance.
– Support bad block management.
– Support dynamic serial number modification via mass production software.
– Support software write protection.

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051.
– Embedded RAM and ROM.
– Built-in power on reset.
– Built-in programmable OSC.
– Built-in 1.8V regulator for core.
– Embedded 8-bits correction ECC function.

4. Technology:
– 0.16 um logic process.
– 2.7 ~ 3.6V operating voltage.

5. Product Packages:
– 68-pad bare die.
– 53-LGA package.


AU7656 – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7656 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7656 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7656 exhibits high performance data transfer speed in accessing SLC/MLC NAND flash.
In addition to the performance and compatibility benefits, AU7656 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7656 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7656 is available in either 53-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification V1.0 / V1.1 / V2.0.
– Support command class 0, 2, 4, 5, 6, 7, 8 and 10.
– Support SPI communication protocol.
– Support clock frequency 0 ~ 50 MHz.
– Support different data bus width x1, x4.
– Support standard capacity SD card (<=2GB). – Support high capacity SDHC card (>2GB ~ 32GB).
– Support Content Protection for Recordable Media (CPRM) for SD audio.
– Support vendor command for the development of special applications.
– Support firmware upgrade mechanism (ISP, In-System Programming).

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung / Toshiba / Renesas / IM / Micron / Intel / ST / Hynix)
– Support SLC/MLC/TLC flash
– Support 1Gb / 2Gb / 4Gb / 8Gb / 16Gb / 32Gb flash chips.
– Support two plane operation.
– Support 4KB / 8KB page type flash.
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 4 CE and 2 R/B pins.
– Talent BCH ECC algorithm for randomly 16/24/30 bit error detection and correction per sector (1K bytes)
– Integrate hardware DMA engine to tune up the operation performance.
– Concurrent bus operation using multiple FIFO for better performance.
– Support bad block management.
– Support dynamic serial number modification via mass production software.
– Support software write protection.

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051.
– Embedded RAM and ROM.
– Built-in power on reset.
– Built-in programmable OSC.
– Built-in 1.8V regulator for core.
– Embedded 8-bits correction ECC function.

4. Technology:
– 0.16 um logic process.
– 2.7 ~ 3.6V operating voltage.

5. Product Packages:
– 57-pad bare die.
– 53-LGA package.


AU7657 – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7657 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7657 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7657 exhibits high performance data transfer speed in accessing SLC/MLC NAND flash.
In addition to the performance and compatibility benefits, AU7657 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7657 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7657 is available in either 53-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification V1.0 / V1.1 / V2.0.
– Support command class 0, 2, 4, 5, 6, 7, 8 and 10.
– Support SPI communication protocol.
– Support clock frequency 0 ~ 50 MHz.
– Support different data bus width x1, x4.
– Support standard capacity SD card (<=2GB). – Support high capacity SDHC card (>2GB ~ 32GB).
– Support Content Protection for Recordable Media (CPRM) for SD audio.
– Support vendor command for the development of special applications.
– Support firmware upgrade mechanism (ISP, In-System Programming).

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung / Toshiba / Renesas / IM / Micron / Intel / ST / Hynix)
– Support SLC/MLC/TLC flash
– Support 1Gb / 2Gb / 4Gb / 8Gb / 16Gb / 32Gb flash chips.
– Support two plane operation.
– Support 4KB / 8KB page type flash.
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 4 CE and 2 R/B pins.
– Talent BCH ECC algorithm for randomly 8/12/15 bit error detection and correction per sector (512 bytes)
– Integrate hardware DMA engine to tune up the operation performance.
– Concurrent bus operation using multiple FIFO for better performance.
– Support bad block management.
– Support dynamic serial number modification via mass production software.
– Support software write protection.

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051.
– Embedded RAM and ROM.
– Built-in power on reset.
– Built-in programmable OSC.
– Built-in 1.8V regulator for core.
– Embedded 8-bits correction ECC function.

4. Technology:
– 0.16 um logic process.
– 2.7 ~ 3.6V operating voltage.

5. Product Packages:
– 57-pad bare die.
– 53-LGA package.


AU7660A – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7660 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7660 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7660 exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7660 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7660 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7660 is available in either 53-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification v1.0/v1.1/v2.0
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4.
– Support standard capacity SD card (<=2GB) – Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung /Toshiba /Sandisk /Intel /Micron /Hynix)
– Support SLC/MLC/TLC flash
– Support 8Gb/16Gb/32Gb/64Gb/128Gb/256Gb flash chips
– Support two plane operation
– Support 4KB/8KB page type flash
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 4 CE and 2 R/B pins
– Talent BCH ECC algorithm for randomly up to 44 bit error detection and correction per 1KB
– Integrate hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Support bad block management
– Support dynamic serial number modification via mass production software
– Support software write protection
– Embedded BCT management

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.8 voltage Regulator for core
– Embedded BCH 44bits per 1KB ECC Engine

4. Technology:
– 0.153 um logic process
– 2.7 ~ 3.6 volts operating voltage

5. Product Packages:
– 55-pad bare die
– 53-pin LGA package


AU7660B – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7660 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7660 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7660 exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7660 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7660 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7660 is available in either 53-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification v1.0/v1.1/v2.0
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4.
– Support standard capacity SD card (<=2GB) – Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung /Toshiba /Sandisk /Intel /Micron /Hynix)
– Support SLC/MLC/TLC flash
– Support 8Gb/16Gb/32Gb/64Gb/128Gb/256Gb flash chips
– Support two plane operation
– Support 4KB/8KB page type flash
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 4 CE and 2 R/B pins
– Talent BCH ECC algorithm for randomly up to 44 bit error detection and correction per 1KB
– Integrate hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Support bad block management
– Support dynamic serial number modification via mass production software
– Support software write protection
– Embedded BCT management

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.8 voltage Regulator for core
– Embedded BCH 44bits per 1KB ECC Engine

4. Technology:
– 0.153 um logic process
– 2.7 ~ 3.6 volts operating voltage

5. Product Packages:
– 55-pad bare die
– 53-pin LGA package


AU7662A – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7662A single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7662A supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7662A exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7662A offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7662A supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7662A is available in either 53-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification v1.0/v1.1/v2.0
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support standard capacity SD card (<=2GB) – Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung /Toshiba /Sandisk /Intel /Micron /Hynix)
– Support SLC/MLC/TLC flash
– Support 8Gb/16Gb/32Gb/64Gb/128Gb/256Gb flash chips
– Support two plane operation
– Support 4KB/8KB page type flash
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 8CE and 2 R/B pins
– Talent BCH ECC algorithm for randomly up to 72 bit error detection and correction per 1KB
– Integrate hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Support bad block management
– Support dynamic serial number modification via mass production software
– Support software write protection
– Embedded BCT management
– Support Toggle/ONFI 2.2

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.8 voltage Regulator for core
– Embedded BCH 72bits per 1KB ECC Engine

4. Technology:
– 0.153 um logic process
– 2.7 ~ 3.6 volts operating voltage

5. Product Packages:
– 66-pad bare die


AU7662B – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7662B single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7662B supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7662B exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7662B offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7662B supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7662B is available in either 53-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification v1.0/v1.1/v2.0
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support standard capacity SD card (<=2GB) – Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung /Toshiba /Sandisk /Intel /Micron /Hynix)
– Support SLC/MLC/TLC flash
– Support 8Gb/16Gb/32Gb/64Gb/128Gb/256Gb flash chips
– Support two plane operation
– Support 4KB/8KB page type flash
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 8CE and 2 R/B pins
– Talent BCH ECC algorithm for randomly up to 72 bit error detection and correction per 1KB
– Integrate hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Support bad block management
– Support dynamic serial number modification via mass production software
– Support software write protection
– Embedded BCT management
– Support Toggle/ONFI 2.2

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.8 voltage Regulator for core
– Embedded BCH 72bits per 1KB ECC Engine

4. Technology:
– 0.153 um logic process
– 2.7 ~ 3.6 volts operating voltage

5. Product Packages:
– 66-pad bare die


AU7663 – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7663 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7663 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7663 exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7663 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7663 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7663 is available in either 46-pin LGA package or in bare die format
Main Features:

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification v1.0/v1.1/v2.0
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support standard capacity SD card (<=2GB) – Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung /Toshiba /Sandisk /Intel /Micron /Hynix)
– Support SLC/MLC/TLC flash
– Support 8Gb/16Gb/32Gb/64Gb/128Gb/256Gb flash chips
– Support two plane operation
– Support 4KB/8KB page type flash
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 8CE and 2 R/B pins
– Talent BCH ECC algorithm for randomly up to 72 bit error detection and correction per 1KB
– Integrate hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Support bad block management
– Support dynamic serial number modification via mass production software
– Support software write protection
– Embedded BCT management
– Support Toggle/ONFI 2.2

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.8 voltage Regulator for core
– Embedded BCH 72bits per 1KB ECC Engine

4. Technology:
– 0.153 um logic process
– 2.7 ~ 3.6 volts operating voltage

5. Product Packages:
– 66-pad bare die
– 46-pin LGA package


AU7663A – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7663 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7663 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7663 exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7663 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7663 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7663A is available in either 46-pin LGA package or in bare die format

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification v1.0/v1.1/v2.0
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support standard capacity SD card (<=2GB) – Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung /Toshiba /Sandisk /Intel /Micron /Hynix)
– Support SLC/MLC/TLC flash
– Support 8Gb/16Gb/32Gb/64Gb/128Gb/256Gb flash chips
– Support two plane operation
– Support 4KB/8KB page type flash
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 8CE and 2 R/B pins
– Talent BCH ECC algorithm for randomly up to 72 bit error detection and correction per 1KB
– Integrate hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Support bad block management
– Support dynamic serial number modification via mass production software
– Support software write protection
– Embedded BCT management
– Support Toggle/ONFI 2.2

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.8 voltage Regulator for core
– Embedded BCH 72bits per 1KB ECC Engine

4. Technology:
– 0.153 um logic process
– 2.7 ~ 3.6 volts operating voltage

5. Product Packages:
– 66-pad bare die
– 46-pin LGA package


AU7663B – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7663 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7663 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7663 exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7663 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7663 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7663B is available in either 46-pin LGA package or in bare die format

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification v1.0/v1.1/v2.0
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support standard capacity SD card (<=2GB) – Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung /Toshiba /Sandisk /Intel /Micron /Hynix)
– Support SLC/MLC/TLC flash
– Support 8Gb/16Gb/32Gb/64Gb/128Gb/256Gb flash chips
– Support two plane operation
– Support 4KB/8KB page type flash
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 8CE and 2 R/B pins
– Talent BCH ECC algorithm for randomly up to 72 bit error detection and correction per 1KB
– Integrate hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Support bad block management
– Support dynamic serial number modification via mass production software
– Support software write protection
– Embedded BCT management
– Support Toggle/ONFI 2.2

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.8 voltage Regulator for core
– Embedded BCH 72bits per 1KB ECC Engine

4. Technology:
– 0.153 um logic process
– 2.7 ~ 3.6 volts operating voltage

5. Product Packages:
– 66-pad bare die
– 46-pin LGA package


AU7663M – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7663M single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7663M supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7663M exhibits high performance data transfer speed in accessing SLC/MLC NAND flash.
In addition to the performance and compatibility benefits, AU7663M offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7663M supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7663M is available in either 46-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification v1.0/v1.1/v2.0
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support standard capacity SD card (<=2GB) – Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung /Toshiba /Sandisk /Intel /Micron /Hynix)
– Support SLC/MLC flash
– Support 8Gb/16Gb/32Gb/64Gb/128Gb/256Gb flash chips
– Support two plane operation
– Support 4KB/8KB/16KB page type flash
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 4CE and 2 R/B pins
– Talent BCH ECC algorithm for randomly up to 40 bit error detection and correction per 1KB
– Integrate hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Support bad block management
– Support dynamic serial number modification via mass production software
– Support software write protection
– Embedded BCT management
– Support Toggle/ONFI 2.2

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.8 voltage Regulator for core
– Embedded BCH 40bits per 1KB ECC Engine

4. Technology:
– 0.153 um logic process
– 2.7 ~ 3.6 volts operating voltage

5. Product Packages:
– 50-pad bare die


AU7663ML – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7663ML single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7663ML supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7663ML exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7663ML offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7663ML supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.

> Main Features:
1.Host Interface (SD card)
– Compliant with SD specifications version 2.x
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)
– Bus speed Mode:
– – DS, Default speed mode: 3.3V signaling, frequency up to 25 MHz, up to 12.5 MB/sec
– – HS, High-Speed mode: 3.3V signaling, frequency up to 50 MHz, up to 25 MB/sec

2.Flash Memory Interface
– Direct interface to NAND flash chips
– Supports following latest generation flash, including MLC
– – SAMSUNG 19nm/1ynm flash
– – Hynix 20/16nm flash
– – Micron/Intel 25/20/1xnm flash
– Supports ONFI 2.x Interface Specification and Standard command set
– Supports Toggle Mode 1.0 NAND flash
– Supports 8KB/16KB page type flash
– Supports 3.3V flash
– Supports single channel 8 bit flash interface with 1CE and 1 R/B pins
– Supports two plane operation
– Supports 2-way interleave operation
– Talent BCH ECC algorithm for randomly 40 bit error detection and correction per 1KB
– Integrates hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Supports bad block management
– Supports dynamic serial number modification via mass production software
– Supports software write protection

3.Micro Controller and Analog IP
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.5 voltage Regulator for core
– Embedded BCH up to 40bits per 1KB ECC Engine

4.Technology
– 0.11 um logic process
– 2.7 ~ 3.6 volts operating voltage

5.Product Packages
– 33-pad bare die


AU7663T – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7663T single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7663T supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7663T exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7663T offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7663T supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.

> Main Features:
1.Host Interface (SD card)
– Compliant with SD specifications version 2.x
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)
– Bus speed Mode:
– DS, Default speed mode: 3.3V signaling, frequency up to 25 MHz, up to 12.5 MB/sec
– HS, High-Speed mode: 3.3V signaling, frequency up to 50 MHz, up to 25 MB/sec

2.Flash Memory Interface
– Direct interface to NAND flash chips
– Supports following latest generation flash, including MLC / TLC
– – Hynix 20/16nm flash
– – Micron/Intel 25/20/1xnm flash
– – Toshiba 19/A19nm flash
– – SanDisk 19/1Ynm flash
– – Samsung 21/19nm flash
– Supports ONFI 2.x Interface Specification and Standard command set
– Supports Toggle Mode 1.0 NAND flash
– Supports 8KB/16KB page type flash
– Supports 3.3V flash
– Supports single channel 8 bit flash interface with 8CE and 2 R/B pins
– Supports two plane operation
– Supports 2/4-way interleave operation
– Talent BCH ECC algorithm for randomly 72 bit error detection and correction per 1KB
– Integrates hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Supports bad block management
– Supports dynamic serial number modification via mass production software
– Supports software write protection

3.Micro Controller and Analog IP
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.5 voltage Regulator for core
– Embedded BCH up to 72bits per 1KB ECC Engine

4.Technology
– 0.11 um logic process
– 2.7 ~ 3.6 volts operating voltage

5.Product Packages
– 55-pad bare die


AU7663TL – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7663TL single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7663TL supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7663TL exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7663TL offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7663TL supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.

> Main Features:
1.Host Interface (SD card)
– Compliant with SD specifications version 2.x/3.0x (UHS104)
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)
– Bus speed Mode:
– – DS, Default speed mode: 3.3V signaling, frequency up to 25 MHz, up to 12.5 MB/sec
– – HS, High-Speed mode: 3.3V signaling, frequency up to 50 MHz, up to 25 MB/sec

2.Flash Memory Interface
– Direct interface to NAND flash chips
– Supports following latest generation flash, including MLC / TLC
– – SAMSUNG 19nm/1ynm flash
– – Hynix 20/16nm flash
– – Micron/Intel 25/20/1xnm flash
– – Toshiba/Sandisk A19nm/1ynm/1znm flash
– Supports ONFI 2.x Interface Specification and Standard command set
– Supports Toggle Mode 1.0 NAND flash
– Supports 8KB/16KB page type flash
– Supports 3.3V flash
– Supports single channel 8 bit flash interface with 2CE and 1 R/B pins
– Supports two plane operation
– Supports 2-way interleave operation
– Talent BCH ECC algorithm for randomly 72 bit error detection and correction per 1KB
– Integrates hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Supports bad block management
– Supports dynamic serial number modification via mass production software
– Supports software write protection

3.Micro Controller and Analog IP
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in voltage detector
– Built-in 1.5 voltage Regulator for core
– Embedded BCH up to 72bits per 1KB ECC Engine

4.Technology
– 0.11 um logic process
– 2.7 ~ 3.6 volts operating voltage

5.Product Packages
– 34-pad bare die


AU7665 – SD Memory Card Controller

> Description:
As the popularity of using digital companions continue to grow, small form factor portable media, such as SD, become indispensable in daily life. Coming along with the high demand of using these kinds of digital storage, its power consumption and performance in content access are the most important consideration points in selecting end products.
Alcor Micro’s AU7665 single chip flash memory controller is specifically designed as the solution for building SD memory card. Its high performance, low power consumption and simple interface can be easily applied it to SD memory card manufacturing.
Maintaining multiple NAND flash sources is a common policy seen in memory card manufacturing industry. It is therefore highly desirable for memory card controller to offer the flexibility of adopting new firmware. The architecture of AU7665 supports ISP (In System Programming) with which memory card manufacturers could change firmware dynamically when there are new flash needs to be supported.
With a specially crafted DMA engine built inside, AU7665 exhibits high performance data transfer speed in accessing SLC/MLC/TLC NAND flash.
In addition to the performance and compatibility benefits, AU7665 offers powerful ECC (Error Code Correction) engine, which is fundamentally important for overcoming the inherent problems of NAND flash. Moreover, AU7665 supports CPRM (Content Protection for Recordable Media) mechanism, which is mandatory to have for playing back digitally secured contents.
AU7665 is available in either 46-pin LGA package or in bare die format.

> Main Features:
1. Host Interface:
* SD card
– Compatible with SD physical layer specification v1.0/v1.1/v2.0
– Support command class 0,2,4,5,6,7,8 and 10
– Support SPI communication protocol
– Support clock frequency 0 ~ 50MHz
– Support different data bus width x1, x4
– Support standard capacity SD card (<=2GB) – Support high capacity SDHC card (>2GB ~32GB)
– Support Content Protection for Recordable Media (CPRM) for SD audio
– Support vendor command for the development of special applications
– Support firmware upgrade mechanism (ISP, In-System Programming)

2. Flash Memory Interface:
– Direct interface to NAND flash chips (Samsung /Toshiba /Sandisk /Intel /Micron /Hynix)
– Support SLC/MLC/TLC flash
– Support 8Gb/16Gb/32Gb/64Gb/128Gb/256Gb flash chips
– Support two plane operation
– Support 4KB/8KB/16KB page type flash
– Support 1.8/3.3V flash
– Support single channel 8 bit flash interface with 8CE and 2 R/B pins
– Talent BCH ECC algorithm for randomly up to 64 bit error detection and correction per 1KB
– Integrate hardware DMA engine to tune up the operation performance
– Concurrent bus operation using multiple FIFO for better performance
– Support bad block management
– Support dynamic serial number modification via mass production software
– Support software write protection
– Embedded BCT management
– Support Toggle/ONFI 2.2

3. Micro Controller and Analog IP:
– Embedded RISC architecture 8051
– Embedded RAM and ROM
– Built-in Power On Reset
– Built-in programmable OSC
– Built-in 1.8 voltage Regulator for core
– Embedded BCH 64bits per 1KB ECC Engine

4. Technology:
– 0.153 um logic process
– 2.7 ~ 3.6 volts operating voltage

5. Product Packages:
– 54-pad bare die


Solid State Drive Controller

AU7510 – Solid State Drive Controller

> Description:
AU7510 is a single chip, one SATA I/II port to NAND flash interface. It is native design to provide higher bandwidth for flash memory access.
AU7510 can support the maximum read and write speed to drive the limit of flash memory. It total supports up to 64 pieces of NAND Flash.
AU7510 has the best supporting the latest NAND flash memory, including Toshiba, Samsung, Hynix and Micron Flash. It also provides the embedded hardware error correction code (ECC), wear leveling, and bad block management technology in the chip. In order to resolve compatibility issue, AU7510 provides the on line firmware upgrade ability.
AU7510 provides embedded processor, internal masked ROM, data SRAM, SATA link/transport layer, SATA PHY. Based on the efficient architecture, the AU7510 can provide the best performance.

> Main Features:
1. Compliance
– Compliant with Serial ATA International Organization: Serial ATA Revision 2.6.

2. SATA I/II
– Supports 1-port 1.5/3.0Gbps SATA I/II interface.
– CPU
– Embedded processor.
– Embedded masked program ROM.
– Embedded system RAM.

3. FLASH
– Supports to up to 64 pieces of NAND Flash.
– Enhanced endurance by dynamic/static wear-leveling.
– Supports Reed-Solomon ECC 8/12 bytes in 512 data bytes depends on Flash type.
– Supports 2K/4K bytes page size.
– Supports dynamic power management.
– SMART (Self-Monitoring, Analysis and Reporting Technology)
– Data integrity under power-cycling.
– Supports 8 bits Flash interface.

4. SYSTEM
– Integrated 1-port SATA II and 4-channel Flash controller.
– Provides 3 GPI and 3GPO pins for customer.128-pin LQFP lead-free/Halogen-free/RoHS compliant package is available.
– 180-pin TFBGA lead-free/Halogen-free/RoHS compliant package is available.


AU7511 – Solid State Drive Controller

> Description:
AU7511 provides the superior solution with high performance and flexible flash support for SATA SSD, and is compliant with 1.5/3.0Gbps SATA I/II interface.
Through endurance and performance enhanced by SDRAM cache buffer, AU7511 provides excellent performance and reliability for NB/UMPC/IPC applications.
AU7511 optimizes the internal system control to reach write performance up to 90MB/S and provides dual/four channel flash management with 16CE pins per channel to maximize the flash support up to 64pcs flash. AU7511 embeds 8/12 bit BCH-ECC engine for main stream NAND flash requirement and advanced dynamic power management technology for market requirement. Due to external SDRAM cache buffer, AU7511 presents at least 14% erase count decrease and promotes 4k data random write speed up to 15MB/s. Featuring high performance, lower power consumption, high endurance, and flexible flash support, AU7511 is the best solutionfor NB/ UMPC/ IPC applications.
AU7511 also provides In-system programming technology and On-line firmware upgrade technology to make firmware upgrade and user interface update easier.

> Main Features:
1. Host Interface
– Compliant with Serial ATA International Organization: Serial ATA Revision 2.6.
– Compliant with ATA-7 V3
– Support UDMA mode 0-6
– Support PIO mode 0-4
– Support Multi-Word DMA mode 0-2
– Suppot NCQ(Native Command Queuing)
– Supports 1-port 1.5/3.0Gbps SATA I/II interface.

2. FLASH Management
– Support both MLC and SLC
– Support both 2 channel and 4 channel flash
– Support up to 16CE pins per channel
– Support up to 64 pieces of NAND Flash
– Support 2k/4k per page Flash
– Advanced 8/12 bit BCH-ECC engine
– Support SDRAM cache buffer
– Main stream SDRAM:4Banks x 2Mbits x 16, Clock Frequency = 133MHz
– Endurance enhanced by global static-wear-leveling
– Endurance enhanced by SDRAM cache buffer
– Support S.M.A.R.T function (Self-Monitoring, Analysis and Reporting Technology)

3. Performance
* 4CH performance:
– Sequential R/W: Up to 100MB/s and 90MB/s (SLC)
– Sequential R/W: Up to 100MB/s and 50MB/s (MLC)
– 4k random write: Up to 15MB/s (MLC)
– Reduce erase count at least 14%

4. Package
– 180-pin TFBGA lead-free/Halogen-free/RoHS compliant package is available.


MP3 Player Controller

AU3132 – USB 2.0 SD / MMC Card Reader with MP3 / WMA Decoder

> Description:
The AU3132 is an SOC solution designed to address the needs of MP3 / WMA digital audio player using SD / MMC memory cards.
Featuring USB 2.0 engine, MP3 / WMA decode engine, 16-bit audio DAC, LED, and GPIO inside with SDHC and MMC4.2 support.
The built-in regulator and battery monitor make AU3132 an ideal solution for building low cost digital audio players. In addition to the low cost characteristics, low power consumption and high performance are two other innate features of AU3132.
Crafted with smart ingenuity of system architecture and firmware design, the product using AU3132 could also be treated as a USB 2.0 SD / MMC card reader. Its high-speed read and write access performance enable users to transfer data and music files efficiently. ISP (In-System Programming) technologies allow manufacturers to build MP3 products supporting wide range of flash and developing promotional units with auto-run function.
The built-in MP3 / WMA decoder inside AU3132 is a cost-efficient solution for playing back digital audio.
Altogether, using AU3132 with minimally required external components on board entitles the end product to have strong competitiveness in the dimensions of cost, performance and power consumption. With these outstanding characteristics, the products using AU3132 could easily exhibit strong competing power to the rival offerings of its same kind.

> Main Features:
1. Embedded MP3 / WMA Decoder:
– Support both ISO11172-3, ISO13818-3 layer III, WMA V4, V7, V8, V9, V10 audio decoding.
– Support 8~48 KHz sampling frequency.
– Support single channel, dual channel, and stereo format.
– 20 steps digital volume control.
– 10-band equalizer support Normal, Live, Party, Classic, Pop, and Rock sound effects.
– Support A-B section and repeat for language and song learning- Support A-B section and repeat for language and song learning.

2. USB 2.0 SD / MMC Card Reader Functions:
– Fully compatible with USB specification V2.0
– Support HS (480M bits / sec) and FS (12M bits / sec) transfer.
– Support all USB standard commands.
– Single-cycle 8051 CPU core.
– I2C for external device communication.
– Fully compatible with SD2.0 (SDHC) and MMC4.2 and backward compatible.
– FAT16 / FAT32 supporting.

3. Integrated Audio DAC:
– Save external components.
– SNR up to 86db.
– Dynamic power control for audio DAC.

4. Integrated Power Management:
– Save external components.
– On-chip 3.3V to 1.8V regulator.
– On-chip 5V to 3.3V regulator.
– Low power 1.8V logic core operation voltage.
– 3.3V operation I/O with 5V tolerance range.
– Integrated battery monitor for 1.5V dry cell and 3.7V Li-ion rechargeable batteries.

5. Buttons and Menu Functionality:
– Refer to package information.

6. Power:
– USB bus powered for USB reader mode.
– For single AAA dry battery / Nicd / NiMH operating for MP3 / WMA modes.
– Automatically system shut down for system idle, low battery and paused for more than 3 minutes.


AU3150 – MP3 / WMA Player with USB 2.0 Flash Disk Controller

> Description:
The AU3150 is an SOC solution designed to address the needs of MP3 / WMA Digital Audio Player using NAND flash.
Featuring USB 2.0 Engine, flash disk, MP3 / WMA Decode Engine, 16-bit Audio DAC, LED, and GPIO inside.
The built-in regulator and battery monitor make AU3150 an ideal solution for building low cost digital audio players. In addition to the low cost characteristics, low power consumption and high performance are two other innate features of AU3150.
Crafted with smart ingenuity of system architecture and firmware design, the product using AU3150 could also be treated as a USB 2.0 flash disk with good flash read / write performance. As a flash disk, it supports SLC (Single-Level Cell) and MLC (Multi-Level Cell) NAND and AG-AND with multiple dies data flashes. Its high-speed read and write access performance enable users to transfer data and music files efficiently. ISP (In-System Programming) technologies allow manufacturers to build MP3 products supporting wide range of flash and developing promotional units with auto run function.
The built-in MP3 / WMA decoder inside AU3150 is a cost-efficient solution for playing back digital audio.
Altogether, using AU3150 with minimally required external components on board entitles the end product to have strong competitiveness in the dimensions of cost, performance and power consumption. With these outstanding characteristics, the products using AU3150 could easily exhibit strong competing power to the rival offerings of its same kind.

> Main Features:
1. Embedded MP3 / WMA Decoder:
– Support both ISO11172-3, ISO13818-3 layer III, WMA V4, V7, V8, V9, V10 audio decoding.
– Support 8~48 KHz sampling frequency.
– Support single channel, dual channel, and stereo format.
– 20 steps digital volume control.
– 10-band equalizer support Normal, Live, Party, Classic, Pop, and Rock sound effects.
– Support A-B section and repeat for language and song learning.

2. USB 2.0 Flash Disk Functions:
– Fully compatible with USB specification V2.0.
– Support HS (480M bits / sec) and FS (12M bits / sec) transfer.
– Support all USB standard commands.
– Single-cycle 8051 CPU core.
– I2C for external device communication.
– Fully compatible with SLC and MLC from 64 Mbytes to 16 Gbytes.
– FAT16 / FAT32 supporting.

3. Firmware Upgrade:
– 32K firmware upgrade for flash support and buttons definitions.

4. Integrated Audio Codec:
– Save external components.
– SNR up to 86db.
– Dynamic power control for audio codec.

5. Integrated Power Management:
– Save external components.
– On-chip 3.3V to 1.8V regulator.
– On-chip 5V to 3.3V regulator.
– Low power 1.8V logic core operation voltage.
– 3.3V operation I/O with 5V tolerance range.
– Integrated battery monitor for 1.5V dry cell and 3.7V Li-ion rechargeable batteries.

6. Buttons and Menu Functionality:
– Play / Pause: Play and pause music.
– Power On / Off: Hold Play / Pause key for 1/3 second for power on / off.
– Volume Up / Down: Increase and decrease volume.
– Previous / Next: Jump to last / next song and play.
– Normal / Random: Cyclic selection for Sequential / Random playing sequence (default for Normal)
– A-B section: A-B section setting and repeating (A -> B & Repeat -> Cancel).
– Hold / Normal: Hold the key sense (default for Normal).

7. Power:
– USB bus powered for USB reader mode.
– For single AAA dry battery / Nicd / NiMH operating for MP3 / WMA / FM modes.
– Automatically system shut down for system idle, low battery and paused for more than 3 minutes.

8. Firmware upgrade by ISP (In System Programming):
* The following items can be customized by manufacturers to develop unique products:
– Programmable support of wide range of SLC and MLC flash.
– Flash module support.
– Auto-Run.
– Programmable support of button functions when press in pulse and hold.


AU3152 – MP3 / WMA Player with USB 2.0 Flash Disk Controller

> Description:
The AU3152 is an SOC solution designed to address the needs of MP3 / WMA Digital Audio Player using NAND flash.
Featuring USB 2.0 Engine, flash disk, MP3 / WMA Decode Engine, 16-bit Audio DAC, LED, and GPIO inside. The built-in regulator and battery monitor make AU3152 an ideal solution for building low cost Digital Audio Players. In addition to the low cost characteristics, low power consumption and high performance are two other innate features of AU3152.
Crafted with smart ingenuity of system architecture and firmware design, the product using AU3152 could also be treated as a USB 2.0 flash disk with good flash read/write performance. As a flash disk, it supports SLC (Single-Level Cell) and MLC (Multi-Level Cell) NAND and AG-AND with multiple dies data flashes. Its high-speed read and write access performance enable users to transfer data and music files efficiently. ISP (In-System Programming) technologies allow manufacturers to build MP3 products supporting wide range of flash and developing promotional units with auto-run function.
The built-in MP3 / WMA decoder inside AU3152 is a cost-efficient solution for playing back digital audio. Altogether, using AU3152 with minimally required external components on board entitles the end product to have strong competitiveness in the dimensions of cost, performance and power consumption. With these outstanding characteristics, the products using AU3152 could easily exhibit strong competing power to the rival offerings of its same kind.

> Main Features:
1. Embedded MP3/WMA Decoder:
– Support both ISO11172-3, ISO13818-3 layer III, WMA V4, V7, V8, V9, V10 audio decoding.
– Support 8~48 KHz sampling frequency.
– Support single channel, dual channel, and stereo format.
– 20 steps digital volume control.
– 10-band equalizer support Normal, Live, Party, Classic, Pop, and Rock sound effects.
– Support A-B section and repeat for language and song learning.

2. USB 2.0 Flash Disk Functions:
– 8bit / 12bit ECC (8bit / 512Bytes and 12bit / 512Bytes BCH ECC engines).
– Support 4k / PageSLC and MLC dual channel with high performance.
– Integrates hardware DMA engine to tune up the operation performance.
– Improve read performance to 30MB / sec.
– Complies with the standards defined in USB V2.0, USB Device Class Definition for Mass Storage and Bulk – Transport V1.0.
– Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE.
– Concurrent bus operation using multiple FIFO for better performance.
– Supports bad block management.
– Supports dynamic serial number modification via mass production software.
– Supports Auto Run function.

3. Firmware Upgrade:
– 16K firmware upgrade for flash support and buttons definitions.

4. Integrated Audio DAC:
– Save external components.
– SNR up to 80db.
– Dynamic power control for audio DAC.

5. Integrated Power Management:
– Save external components.
– On-chip 3.3V to 1.8V regulator.
– Embedded 5V to 3.3V regulator.
– Low power 1.8V logic core operation voltage.
– 3.3V operation I/O with 5V tolerance range.
– Integrated battery monitor for 1.5V dry cell and 3.7V Li-ion rechargeable batteries.

6. Buttons and Menu Functionality:
– Play / Pause: Play and pause music.
– Hold / Normal: Hold the key sense (default for Normal).
– AD Key.
– Volume Up / Down: Increase and decrease volume.
– Previous / Next: Jump to last / next song and play.
– Normal / Random: Cyclic selection for Sequential / Random playing sequence.
– A-B Section: A-B section setting and repeating.

7. Power:
– USB bus powered for USB reader mode.
– For single AAA dry battery / Nicd / NiMH operating for MP3 / WMA modes.
– Automatically system shut down for system idle, low battery or paused greater than 3 minutes.

8. Firmware Upgrade by ISP (In System Programming):
* The following items can be customized by manufacturers to develop unique products:
– Programmable support of wide range of SLC and MLC flash.
– Flash module support.
– Auto-run.
– Programmable support of button functions when press in pulse and hold.


Card Reader Controller

AU6336 – USB 2.0 SD / MMC Single LUN Card Reader Controller

> Description:
AU6336 is an USB2.0 high-speed transmission controller, which is designed as a bridge between USB and SD compatible flash card interface, such as SD, HS-SD, MMC, HS-MMC, RS-MMC, MMCmicro…etc. AU6336 can read digital contents stored on memory card designed to cover a wide area of applications such as digital cameras, PDAs, MP3 players and smart phones…etc.
AU6336 inherits the high-performance and cost-efficiency character from Alcor’s products, included power switch integration, dynamic icon utility support, and DMA engine integration.

> Main Features:
– Support USB V2.0 specification and USB Device Class Definition for Mass Storage, Bulk-Transport V1.0.
– Support SD spec up to version 2.0. (SDHC)
– Support MMC spec up to version 4.2 with 4-bit interface.
– Alcor DMA engine integrated for performance enhancement.
– Work with default driver from Windows ME / 2000 / XP / Vista and Mac OS. Windows 98 / 2000 (SP1 / SP2) are supported by vendor driver from Alcor.
– Ping-pong FIFO implementation for concurrent bus operation.
– Support multiple sectors transfer optimize performance.
– Support Dynamic Icon Utility.
– Support LED for bus operating indication.
– Power switch integrated to reduce production BOM cost.
– 3.3V to 1.8V regulators built in.
– 28-QFN package for SD / MMC.


AU6431 – USB 2.0 Single LUN SD/MMC Flash Card Reader Controller

> Description:
The AU6431 is designed to deliver outstanding performance for data transmission between USB and compatible flash card interface. It supports USB 2.0 high-speed transferring to various types of flash media cards such as SD and MMC. Besides, the AU6431 supports several operating systems, including MS Windows, LINUX and Mac OS.
The design of 2-in-1 combo single slot makes the AU6431 more attractive and optimal. The AU6431 integrates a high performance 8051 CPU as well as a splendidly efficient DMA hardware engine and internal 3.3V to 1.8V regulators. The AU6431 provides manufacturers not merely BOM cost saving with the minimal numbers of components needed on the PCB but also smaller circuit board with the 24-pin QFN (4?4 mm) package.
In addition to high-speed 8051 CPU embedded and DMA hardware engine integrated, the AU6431 is fully compliant with USB Device Class Definition for Mass Storage and Bulk-Transport V1.0. Combination with these features, the AU6431 provides a completely ultra high performance USB2.0 card reader solution in a single chip.
AU6431 maximizes performance with the latest and fastest flash card specification available from the industry. Based on the features of low pin count and high performance characteristic, AU6431 supports a wide range of flash card reader applications used to digital camera, MP3 players, cell phone, PDA, camcorder, GPS device and so on to store many types of data, such as digital map, digital photos and compressed music.

> Main Features:
1. General
– Fully compatible with USB 2.0 High Speed and backward compatible with USB 1.1 specifications.
– Supports multiple flash card interfaces, including SD and MMC.
– Supports single LUN.
– Supports operation systems:
– – Support default Mass Storage Class driver form Windows ME, 2000, XP, Vista, Windows 7 and Mac OS.
– – Windows 98 is supported by vendor driver from Alcor.
– Available in 24-pin QFN lead-free, Halogen-free, RoHS compliant package.

2. International Standard Compliance
– USB Device Class Definition for Mass Storage and Bulk-Transport V1.0.
– Secure Digital Card Specification V2.0 (SDHC).
– Complies with MultiMedia Card (MMC) Specification up to V4.2.

3. Benefit
– 1K bytes of ping-pong FIFO buffs for the data transmission between transmitter and receiver.
– Integrated hardware DMA engine enhances overall performance of data transfers.
– Supports power saving mode to reduce power consumption.
– User-friendly Dynamic Icon Utility software can display icon message upon insertion/removal of compatible flash cards under Windows platform.
– Optimizes performance via multiple sectors transfer.
– On-chip 5V to 3.3V and 3.3V to 1.8V regulator offers customers lower BOM cost.
– Clock runs at 48MHz crystal.


AU6433 – USB 2.0 Single-LUN Flash Card Reader Controller

> Description:
The AU6433 is designed to deliver outstanding performance for data transmission between USB and compatible flash card interface. It supports USB 2.0 high-speed transferring to various types of flash media cards such as SD, MMC, xD and MS. Besides, the AU6433 supports several operating systems, including MS Windows, LINUX and Mac OS.

> Main Features:
– Fully compatible with USB 2.0 High Speed and backward compatible with USB 1.1 specifications.
– Supports multiple flash card interfaces, including SD / MMC / xD / MS.
– Supports single LUN.
– Supports both Windows and Mac OS:
– – Default Mass Storage Class driver comes from Windows ME / 2000 / XP / Vista and Mac OS X.
– – Windows 98 is supported by vendor driver from Alcor.
– Available in 28-Pin QFN Lead-free / Halogen-free / RoHS compliant package.


AU6439 – USB2.0 Single-LUN SD/MMC/MS Flash Card Reader Controller

> Description:
The AU6439 is designed to deliver outstanding performance for data transmission between USB and compatible flash card interface. It supports USB 2.0 high-speed transferring to various types of flash media cards such as SD, MMC and MS. Besides, the AU6439 supports several operating systems, including MS Windows, LINUX and Mac OS.
The design of 2-in-1 combo single slot makes the AU6439 more attractive and optimal. The AU6439 integrates a high performance 8051 CPU as well as a splendidly efficient DMA hardware engine and internal 3.3V to 1.8V regulators. The AU6439 provides manufacturers not merely BOM cost saving with the minimal numbers of components needed on the PCB but also smaller circuit board with the 28-pin SSOP package.
In addition to high-speed 8051 CPU embedded and DMA hardware engine integrated, the AU6439 is fully compliant with USB Device Class Definition for Mass Storage and Bulk-Transport V1.0.Combination with these features, the AU6439 provides a completely ultra high performance USB2.0 card reader solution in a single chip.
AU6439 maximizes performance with the latest and fastest flash card specification available from the industry. Based on the features of low pin count and high performance characteristic, AU6439 supports a wide range of flash card reader applications used to digital camera, MP3 players, cell phone, PDA, camcorder, GPS device and so on to store many types of data, such as digital map, digital photos and compressed music.

> Main Features:
1. General
– Fully compatible with USB 2.0 High Speed and backward compatible with USB 1.1 specifications.
– Supports multiple flash card interfaces, including SD, SDHC, MMC, MS, MS PRO, and MS PRO-HG.
– Supports single LUN.
– Supports operation systems:
– – Support default Mass Storage Class driver form Windows ME, 2000, XP, Vista, Windows 7 and Mac OS.
– – Windows 98 is supported by vendor driver from Alcor
– Available in 28-pin SSOP lead-free, Halogen-free, RoHS compliant package.

2. International Standard Compliance
– Complies with USB Device Class Definition for Mass Storage and Bulk-Transport V1.0
– Complies with Secure Digital Card (SD) specification up to V2.0 (SDHC)
– Complies with MultiMedia Card (MMC) specification up to V4.2
– Complies with Memory Stick (MS) specification up to V1.43
– Complies with Memory Stick PRO (MS_Pro) specification up to V1.02
– Complies with Memory Stick PRO-HG (MS PRO-HG) specification up to V1.01
– Complies with Memory Stick Interface Guideline for PC peripheral devices with Memory Stick Slot V1.16-00

3. Benefit
– 1K bytes of ping-pong FIFO buffs the data transmission between transmitter and receiver
– Integrated hardware DMA engine enhances overall performance of data transfers
– Supports power saving mode to reduce power consumption.
– User-friendly Dynamic Icon Utility software can display icon message upon insertion/removal of compatible flash cards under Windows.
– Optimizes performance via multiple sectors transfer.
– On chip 5V to 3.3V and 3.3V to 1.8V regulator offers customers lower BOM cost.
– Clock runs at 48MHz crystal.


AU6466 – USB 2.0 Single LUN Multiple Flash Card Reader Controller

> Description:
The AU6466 is designed to deliver outstanding performance for data transmission between USB and compatible flash card interface. It supports USB 2.0 high-speed transferring to various types of flash media cards such as CF, Micro Drive, SD, MMC, xD and MS. Besides, the AU6466 supports several operating systems, including MS Windows, LINUX and Mac OS.

> Main Features:
1. General
– Fully compatible with USB 2.0 High Speed and backward compatible with USB 1.1 specifications.
– Supports multiple flash card interfaces, including SD, MMC, CF, Micro Drive, xD, SMC, MS.
– Supports single LUN.
– Supports both Windows and Mac OS.
– Default Mass Storage Class driver comes from Windows ME / 2000 / XP / Vista and Mac OS X.
– Windows 98 is supported by vendor driver from Alcor.
– Available in 28-Pin QFN Lead-free / Halogen-free / RoHS compliant package.

2. Compliance
– Complies with USB Device Class Definition for Mass Storage and Bulk-Transport V1.0
– Complies with Secure Digital Card (SD) specification up to Version 2.0 (SDHC)
– Complies with CompactFlash (CF) specification up to Version 4.1 with True IDE PIO mode
– Complies with MultiMedia Card (MMC) specification up to Version 4.2
– Complies with Memory Stick (MS) specification up to Version 1.43
– Complies with Memory Stick PRO (MS_Pro) specification up to Version 1.03
– Complies with Memory Stick PRO-HG (MS PRO-HG) specification up to Version 1.01
– Complies with xD-Picture Card (xD) specification up to Version 1.2

3. Benefit
– Integrated hardware DMA engine enhances overall performance of data transfers.
– User-friendly Dynamic Icon Utility software can display icon message upon insertion / removal of compatible flash cards under Windows.
– LED light indicate bus operating status.
– Optimizes performance via multiple sectors transfer.
– Built-in 5V to 3.3V / 1.8V regulator offers customers lower BOM cost.
– Supports external EEPROM for VID, PID and string customization.
– Clock runs at 12MHz clock.


AU6472 – USB 2.0 Single LUN Multiple Flash Card Reader Controller

> Description:
The AU6472 is designed to deliver outstanding performance for data transmission between USB and compatible flash card interface. It supports USB 2.0 high-speed transferring to various types of flash media cards such as SD, MMC, xD and MS.Besides, the AU6472 supports several operating systems, including MS Windows,LINUX and Mac OS.

> Main Features:
1. General
– Fully compatible with USB2.0 High Speed and backward compatible with USB1.1 specifications
– Supports multiple flash card interfaces, including SD/MMC/MS/xD/MicroSD/M2.
– Supports two share ping LUNs
– – 1st LUN support: SD/MMC/MS/xD
– – 2nd LUN support: MicroSD/M2
– Supports both Windows and Mac OS
– – Default Mass Storage Class driver comes from Windows ME/2000/XP/Vista/Windows 7 and Mac OS
– – Windows 98 is supported by vendor driver from Alcor

2. Compliance
– Complies with USB Device Class Definition for Mass Storage and Bulk-Transport V1.0
– Complies with Secure Digital Card (SD) specification up to ver. 3.0(SDXC)
– Complies with MultiMedia Card (MMC) specification up to ver. 4.4 and supports 8-bit data bus.
– Complies with Memory Stick (MS) specification up to ver. 1.43
– Complies with Memory Stick PRO (MS Pro) specification up to ver. 1.05
– Complies with Memory Stick PRO-HG (MS Pro-HG) specification up to ver. 1.03 and supports 8-bit data bus in first LUN.
– Complies with Memory Stick XC (MSXC) specification up to ver. 1.00-00
– Complies with Memory Stick Interface Guideline for PC peripheral devices with Memory Stick Slot ver.1.16-00
– Support xD spec up to ver. 1.2.

3. Benefit
– 1K bytes of ping-pong FIFO buffs the data transmission between transmitter and receiver
– Integrated hardware DMA engine enhances overall performance of data transfers
– Supports power saving mode to reduce power consumption
– User-friendly Dynamic icon utility software can display icon message upon insertion/removal of compatible flash cards under Windows
– Optimizes performance via multiple sectors transfer
– Built-in 5V to 3.3V and 3.3V to 1.8V regulator offers customers lower BOM cost.
– Clock runs at 12MHz crystal


AU6476 – USB 2.0 Multi-LUN Flash Card Reader Controller

> Description:
The AU6476 is a single chip integrated USB 2.0 multimedia card reader controller that enables PC/DVD/Printer to read/write various type of flash media cards. Flash media cards such as CF, SMC, XD, SD, MMC, Memory Stick are widely used in digital camera, cell phone, PDA and MP3 player to store digital photos and compressed music.
Performance of AU6476 is maximized by implementing the latest and fastest card specification available form the industry.
Especially, AU6476 is designed with the high performance characteristic in flash card I/O speed. Users can easy and fast transfer the digital content among the different flash card.

> Main Features:
– Support USB V2.0 specification and USB Device Class Definition for Mass Storage, Bulk-Transport V1.0.
– Complies with Secure Digital Card (SD) specification up to ver. 3.0(SDXC).
– Support MMC spec up to Version 4.2.
– Support CF spec up to ver. 4.1 Ultra DMA mode.
– Support xD spec up to ver. 1.2
– Support Memory Stick spec up to Version 1.43.
– Support Memory Stick PRO spec up to Version 1.03.
– Support Memory Stick PRO-HG spec up to Version 1.01.
– Support SMC spec up to ver. 1.4
– Hardware DMA engine integrated for performance enhancement.
– Work with default driver from Windows ME/2000/XP/Vista/Windows 7 and Mac OS X; Vendor device driver from Alcor Micro are available to run under Windows 98 and Mac 9.
– Ping-pong FIFO implementation for concurrent bus operation.
– Support multiple sectors transfer optimize performance.
– Support slot-to-slot read / write operation.
– Support Dynamic Icon Utility.
– Support LED for bus operating indication.
– Power switch integrated to reduce production BOM cost.
– 30MHz 8051 CPU.
– On-chip 5V to 3.3V/1.8V regulator.
– Runs at 12MHz crystal.
– Available in 100-pin LQFP package.


eMMC Controller

AU7750 – eMMC Controller

> Description:
The e•MMC is a managed memory capable of storing code and data. It is specifically designed for mobile devices.
It includes MMC interface, NAND flash and Controller and are packaged in a BGA chip. Host processor just sends the commands via MMC interface simply without management technology of NAND flash, such as ECC, Wear-Leveling and BBM.
By this solution, brand vendors of mobile applications focus their products features and it will shorten the lead time of product development.
The e•MMC is intended to offer the performance and features required by mobile devices while maintaining low power consumption. The e•MMC device contains features that support high throughput for large data transfers and performance for small random data more commonly found in code usage. It also contains many security features.

> Main Features:
1. Compliance
JEDEC eMMC standard version 4.41-compliant
Compatible with eMMC specification Ver. 4.3

2. CPU
Embedded processor.
Embedded masked program ROM.
Embedded system RAM.

3. FLASH
Single channel
Supports 4KB/8KB/16KB page flash
BCH 72 bits per 1KB ECC function configuration
Supports 4 CEs per channel
Global Wear-Leveling
Supports SLC / MLC / TLC Flash and Toggle/ONFI mode

4. Technology
Core Power: 1.2V, 1.8V and 3.3V
Managed NAND in the form of MCP, FBGA & MMC I/F

5. Product Package
169 balls / 153 balls BGA package


Smart Card Reader Controller

AU9520 – USB Smart Card Reader Controller

> Description:
AU9520 is a highly integrated single chip, USB Smart Card reader controller. Highly integration enables the lowest BOM cost of USB Smart Card reader.
The AU9520 supports multiple international standards including ISO7816 for IC card standard, PC/SC 1.0 for windows smart card standard, Microsoft WHQL, EMV for Europay MasterCard Visa standard and USB-IF CCID standard. Manufacturers can easily create a high-security Smart Card reader by deploying Au9520.
The application of AU9520 can be generally applied to Smart Card read / write terminal device, such as ATM, POS terminal, Public telephone, E-Commerce, personal consumption on Internet, personal certification, prepay system, loyalty system…etc.

> Main Features:
– Support EMV specification.
– Support the Universal Serial Bus Specification, version 1.1.
– Based on ISO7816 implementation.
– Support PC Smart Card industry standard – PC/SC 1.0.
– Support Microsoft Smart Card for Windows.
– Meet Microsoft WHQL USB Smart Card Reader requirements.
– Meet US Federal Information Processing Standards (FIPS) Publication 201 requirements on smart card reader interoperability.
– Include WDM driver to work on Windows 98 and Windows 2000.
– Support CT-API.
– Support dual slots for higher security application.
– Support T0, T1 protocol, I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, AT88SC1608 and AT45D041 card.
– Dedicated hardware block implementation for IC and memory card protocols for highest performance.
– Implemented as an USB full speed device with bulk transfer endpoint.
– Built-in 3.3V regulator for single 5V operation.
– Built-in PLL for USB and Smart Card clocks requirement.
– Support EEPROM for USB descriptors customization, including VID / PID.
– Available in 48-LQFP Package.
– Based on USB-CCID class, short APDU level.
– Compatible with Microsoft USB-CCID driver.
– Support 3V / 5V card.


AU9528 – RS232 Smart Card Reader Controller

> Description:
AU9528 is a highly integrated single chip RS232 Smart Card reader controller. Highly integration enables the lowest BOM cost of RS232 Smart Card reader.
The AU9528 supports multiple international standards including ISO7816 for IC card standard, PC/SC 1.0 for windows smart card standard, Microsoft WHQL, EMV for Europay MasterCard Visa standard.
The application of AU9528 can be generally applied to Smart Card read/write terminal device, such as ATM, POS terminal, Public telephone, E-Commerce, personal consumption on Internet, personal certification, prepay system, loyalty system…etc.

> Main Features:
– Support EMV specification.
– Based on ISO7816 implementation.
– Embedded enhanced 8051 MCU.
– Support PC Smart Card industry standard – PC/SC 1.0.
– Support CT-API.
– Support Microsoft Smart Card for Windows.
– Support dual slots for higher security application.
– Support protocol and parameter selection.
– Support card clock up to 4 MHz.
– Support T0, T1 protocol, I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, AT88SC1608 and AT45D041 card.
– Dedicated hardware block implementation for IC and memory card protocols for highest performance.
– Built-in 3.3V regulator for single 5V operation.
– Built-in PLL for Smart Card clocks requirement.
– Available in 48-LQFP package.
– Support 3V / 5V card.


AU9540 – USB Smart Card Reader Controller

> Description:
AU9540 is a highly integrated single chip Smart Card reader controller. Highly integration enables the lowest BOM cost of smart card reader. The AU9540 supports multiple international standards including ISO7816 for IC card standard, PC/SC 2.0 for windows smart card standard, Microsoft WHQL, EMV for Europay MasterCard Visa standard and USB-IF CCID standard. The application of AU9540 can be generally applied to Smart Card read/write terminal device, such as ATM, POS terminal, Public telephone, E-Commerce, personal consumption on Internet, personal certification, prepay system, loyalty system…etc.

> Main Features:
– Support EMV Level 1 specification
– Support USB 2.0 full speed
– Based on ISO7816 implementation
– Support PC Smart Card industry standard – PC/SC 2.0
– Support Microsoft Smart Card for Windows
– Meet Microsoft WHQL USB Smart Card Reader requirements
– Meet US Federal Information Processing Standards (FIPS) Publication 201 requirements on smart card reader interoperability
– Support single slot
– Support T0, T1 protocol
– Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card via external EEPROM
– Support ISO7816 Class A, B and C (5V/3V/1.8V) card
– Implemented as an USB full speed device with bulk transfer endpoint, Mass Storage endpoint
– Built-in PLL for USB and Smart Card clocks requirement
– Support EEPROM for USB descriptors customization (PID/VID/ iManufacturer/ iProduct/Serial Number), Direct Web Page Link, and accessing memory card module.
– EEPROM programmable via USB interface
– Support software update for memory card module
– Support Direct Web Page Link via configuration in external EEPROM
– Support short APDU and extended APDU
– Compatible with Microsoft USB-CCID driver
– Support remote wake up through inserting card/removing card
– Support USB selective suspend
– Support Power Saving Mode (Using one pin to select between Normal/PWR Saving Mode)

Leave a Reply

Your email address will not be published. Required fields are marked *

* Copy This Password *

* Type Or Paste Password Here *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>