IC Phison Electronics

Спецификации на контроллеры Phison Electronics

Product Name: PS2231

Фотография PHISON PS2231

Descriptions:
PHISON’s PS2231 USB-to-Flash micro-controller supports 50+nm flash and is the ideal solution to support readyboost feature in Windows Vista. Equipped with AES-256 encryption and RSA-512 authentication, PS2231 ensures highest levels of security to the host and flash memory. The entire firmware is upgradable thanks to the addition of Programmable RAM, allowing host design flexibility. This chip is specially designed for USB flash disk, USB Disk-On-Module, and embedded applications found in PC motherboard, UMPC, and other portable devices.

Controller Highlights:
- Complies with USB 2.0 & 1.1 host interface specification
- Pin-to-pin compatible with PS2134, PS2136, PS2135
- Build-in hardware 6/12-bit ECC circuit (BCH)
- Build-in hardware 512-bit RSA authentication
- Build-in hardware 256-bit AES encryption
- Supports 50nm+ flash
- Program RAM (Program Upgradable)
- SLC flash Read/Write speed up to 35/26 MB/s
- MLC flash Read/Write speed up to 31/12 MB/s
- Windows Vista certified and supports ReadyBoost feature
- Supports Readyboost with just 1 MLC

Physical Characteristics:
- Fabricated in 0.16um CMOS process
- Available in 64-Pin / 48-pin QFP package
- Program RAM (Program Upgradable)
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

USB Interface:
- Master SPI (Serial Peripheral Interface) for flexible applications
- 12MHz crystal driver circuit
- Integrated 80C51 compatible 8-bit microprocessor
- 1 clock per instruction cycle

NAND Flash Support:
- Supports 50nm+ flash
- Supports up to 8 Chip Enable pins
- Supports 1×8 and 2×8 Flash I/O
- Supports SLC large block (512/2k/4k page) NAND Flash Memory
- Supports MLC large block (512/2k/4k page) NAND Flash Memory
- SLC flash Read/Write speed up to 34/23 MB/s
- MLC flash Read/Write speed up to 31/10 MB/s

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports VID, PID, serial number & vender information update
- Supports high-level secure data storage with RSA-512 and AES-256
- Supports multiple partitions and hidden mode


Product Name: PS2251-38

Descriptions
PHISON’s PS2251-38 is a high speed 4-channel USB-to-Flash micro-controller, which supports 3Xnm+ flash and is the ideal solution for ultra high performance products. This chip is specially designed for USB flash disk, USB Disk-On-Module, and other external storage devices.
- IC Name = PS2251-38
- Spec = USB 2.0
- Channel(max) = 4
- AES = N/A
- CE(max) = 16
- Package = QFP48/64
- ECC(max) = 24

Controller Highlights:
- Complies with USB 2.0 & 1.1 host interface specification
- Pin-to-pin compatible with PS2231 / PS2232 / PS2251-33 / PS2237 / PS2239
- Build-in hardware 12/16/24-bit ECC circuit (BCH)
- Support High speed 480Mbit/s and Full speed 12Mbit/s
- Windows Vista certified and supports ReadyBoost feature

Physical Characteristics:
- Fabricated in 0.11um CMOS process
- Support Program RAM (Firmware Upgradable)
- Available in 48-pin / 64-pin QFP package
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

USB Interface:
- Master SPI (Serial Peripheral Interface) for flexible applications
- 12MHz crystal driver circuit
- Integrated 80C51 compatible 8-bit microprocessor

NAND Flash Support:
- Supports 3Xnm+ flash
- Supports up to 8 Chip Enable pins
- Supports MLC large block (512/2k/4k page) NAND Flash Memory
- MLC flash Read/Write speed up to 32/30 MB/s

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports VID, PID, serial number & vender information update
- Supports multiple partitions and hidden mode


Product Name: PS2251-60

Фотография PHISON PS2251-60

Descriptions:
PHISON’s PS2251-60 is a cost saving USB-to-Flash micro-controller. With a build-in oscillator, PS2251-60 help to reduce the PCBA cost.
- IC Name = PS2251-60
- Spec = USB 2.0
- Channel(max) = 1
- AES = N/A
- CE(max) = 8
- Package = QFP48
- ECC(max) = 60

Controller Highlights:
- Complies with USB 2.0 & 1.1 host interface specification
- Build-in hardware 60-bit ECC (max.) circuit (BCH)
- Support High speed 480Mbit/s and Full speed 12Mbit/s
- Build-in oscillator

Physical Characteristics:
- Fabricated in 0.153um CMOS process
- Available in 48-pin QFP package
- Support Program RAM (Firmware Upgradable)
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

USB Interface:
- Master SPI (Serial Peripheral Interface) for flexible applications
- Integrated 80C51 compatible 8-bit microprocessor

NAND Flash Support:
- Supports 3Xnm / 2Xnm+ flash
- Supports SLC/MLC large block NAND Flash Memory
- Supports TLC large block NAND Flash Memory
- Supports Open NAND Flash Interface (ONFI) 2.0
- Supports Toggle mode DDR NAND Flash Memory
- MLC flash Read/Write speed up to 27/15 MB/s

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports VID, PID, serial number & vender information update
- Supports multiple partitions and hidden mode


Product Name: PS2251-61

Фотография PHISON PS2251-61

Descriptions:
PHISON’s PS2251-61 is a cost saving USB-to-Flash micro-controller. With a build-in oscillator, PS2251-61 help to reduce the PCBA cost.
- IC Name = PS2251-61
- Spec = USB 2.0
- Channel(max) = 1
- AES = N/A
- CE(max) = 8
- Package = QFP48
- ECC(max) = 60

Controller Highlights:
- Complies with USB 2.0 & 1.1 host interface specification
- Build-in hardware 60-bit ECC (max.) circuit (BCH)
- Support High speed 480Mbit/s and Full speed 12Mbit/s
- Build-in oscillator

Physical Characteristics:
- Fabricated in 0.11um CMOS process
- Available in 48-pin QFP package
- Support Program RAM (Firmware Upgradable)
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

USB Interface:
- Master SPI (Serial Peripheral Interface) for flexible applications
- Integrated 80C51 compatible 8-bit microprocessor

NAND Flash Support:
- Supports 3Xnm / 2Xnm+ flash
- Supports SLC/MLC large block NAND Flash Memory
- Supports TLC large block NAND Flash Memory
- Supports Open NAND Flash Interface (ONFI) 2.0
- Supports Toggle mode DDR NAND Flash Memory
- MLC flash Read/Write speed up to 23/15 MB/s

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports VID, PID, serial number & vender information update
- Supports multiple partitions and hidden mode


Product Name: PS2251-67

Фотография PHISON PS2251-67

Descriptions:
PHISON’s PS2251-67 is a cost saving USB-to-Flash micro-controller. With a build-in oscillator, PS2251-67 help to reduce the PCBA cost.
- IC Name = PS2251-67
- Spec = USB 2.0
- Channel(max) = 1
- AES = N/A
- CE(max) = 8
- Package = QFP48
- ECC(max) = 60

Controller Highlights:
- Complies with USB 2.0 & 1.1 host interface specification
- Build-in hardware 60-bit ECC (max.) circuit (BCH)
- Support High speed 480Mbit/s and Full speed 12Mbit/s
- Build-in oscillator

Physical Characteristics:
- Fabricated in 0.11um CMOS process
- Available in 48-pin QFP package
- Support Program RAM (Firmware Upgradable)
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

USB Interface:
- Master SPI (Serial Peripheral Interface) for flexible applications
- Integrated 80C51 compatible 8-bit microprocessor

NAND Flash Support:
- Supports 3Xnm / 2Xnm+ flash
- Supports SLC/MLC large block NAND Flash Memory
- Supports TLC large block NAND Flash Memory
- Supports Open NAND Flash Interface (ONFI) 2.0
- Supports Toggle mode DDR NAND Flash Memory
- MLC flash Read/Write speed up to 23/15 MB/s

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports VID, PID, serial number & vender information update
- Supports multiple partitions and hidden mode


Product Name: PS2251-01

Фотография PHISON PS2251-01

Descriptions:
PHISON’s PS2251-01 is a Super Speed USB 3.0-to-Flash micro-controller, which support the latest 3X/2X nm flash memories. PS2251-01 is backward compatible to USB 2.0 & USB 1.1.
- IC Name = PS2251-01
- Spec = USB 3.0
- Channel(max) = 8
- AES = N/A
- CE(max) = 16
- Package = BGA289 / aQFN174
- ECC(max) = 6X

Controller Highlights:
- Complies with USB 3.0 host interface specification
- Backward complies with USB 2.0 & 1.1 host interface specification
- Build-in hardware 60-bit ECC circuit (BCH)
- Integrated 32-bit processor
- Support Super speed 5Gbit/s
- Support High speed 480Mbit/s and Full speed 12Mbit/s

Physical Characteristics:
- Support Program RAM (Firmware Upgradable)
- Available in AQFN 174 or BGA 289 package
- Operating Voltage: 4.5 ~ 5.5V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

Interface Support:
- Master SPI (Serial Peripheral Interface) for flexible applications
- USB 3.0

NAND Flash Support:
- Supports 3Xnm / 2Xnm+ flash
- Supports SLC/MLC large block NAND Flash Memories
- Supports TLC large block NAND Flash Memories
- Supports Open NAND Flash Interface (ONFI)
- Supports Toggle mode DDR NAND Flash Memories
- MLC flash Read/Write speed up to 245MB/s read and 145 MB/s write

Other Features:
- Support Global Wear-Leveling
- Power Saving implemented
- Supports VID, PID, serial number & vender information update
- Supports multiple partitions and hidden mode


Product Name: PS2251-02

Фотография PHISON PS2251-02

Descriptions:
Phison PS2251-02, an ultra-high-speed USB 3.0-to-Flash micro-controller chip, supports 3X/2X/1X nm flash memory. PS2251-02 is backward compatible with USB 2.0 and USB 1.1.
- IC Name = PS2251-02
- Spec = USB 3.0
- Channel(max) = 1
- AES = N/A
- CE(max) = 4
- Package = QFP64
- ECC(max) = 6X

Controllor Highlights:
- Support USB 3.0 interface
- Backward complies with USB 2.0 & 1.1 host interface specification
- Built-in enhanced of ECC circuit (the BCH)
- Integrated 8051 compatible 8-bit microprocessor
- Support Super Speed ??(5Gb / s)
- Support High Speed ??(480Mb / s), Full Speed ??(12Mb / s)

Characteristics:
- Using the Program RAM (firmware update)
- Available in a TQFP64 package
- Applied voltage: 4.5V ~ 5.5V
- Built-in regulator support the 3.3V/1.8V flash memory I / O interface

Support interface:
- Master SPI (Serial Peripheral Interface) for flexible applications
- USB3.0

NAND flash memory support:
- Support 3X / 2X / 1X NAND flash memory
- Support SLC / MLC / TLC flash memory
- Support the Open NAND Flash Interface (ONFI)
- Support of Toggle-mode DDR flash memory
- Integrated 8051 compatible 8-bit microprocessor
- Support Super Speed (5Gb/s)
- Support High Speed (480Mb/s) & Full Speed (12Mb/s)

Other Features:
- Support Global Wear-Leveling
- Power Saving implemented
- Supports VID, PID, serial number & vender information update
- Supports multiple partitions and hidden mode


Product Name: PS2251-03

Фотография PHISON PS2251-03

Descriptions:
Phison PS2251-03, an ultra-high-speed USB 3.0-to-Flash micro-controller chip, supports 3X/2X/1X nm flash memory. PS2251-03 is backward compatible with USB 2.0 and USB 1.1.
- IC Name = PS2251-03
- Spec = USB 3.0
- Channel(max) = 2
- AES = N/A
- CE(max) = 8
- Package = QFP64/48
- ECC(max) = 6X

Controllor Highlights:
- Support USB 3.0 interface
- Backward complies with USB 2.0 & 1.1 host interface specification
- Built-in enhanced of ECC circuit (the BCH)
- Integrated 8051 compatible 8-bit microprocessor
- Support Super Speed ??(5Gb / s)
- Support High Speed ??(480Mb / s), Full Speed ??(12Mb / s)

Characteristics:
- Using the Program RAM (firmware update)
- Available in a EP-TQFP64, EP-LQFP 48 package
- Applied voltage: 4.5V ~ 5.5V
- Built-in regulator support the 3.3V/1.8V flash memory I / O interface

Support interface:
- USB 3.0
- Master SPI (Serial Peripheral Interface) for flexible applications

NAND flash memory support:
- Support 3X / 2X / 1X NAND flash memory
- Support SLC / MLC / TLC flash memory
- Support the Open NAND Flash Interface (ONFI)
- Support of Toggle-mode DDR flash memory

Other Features:
- Support Global Wear-Leveling
- Power Saving implemented
- Supports VID, PID, serial number & vender information update
- Supports multiple partitions and hidden mode


SSD


Product Name: PS3105

Фотография PHISON PS3105

Descriptions:
PHISON’s PS PS3105-S5 SATA-to-Flash micro-controller specially designed for SATA SSD, mini-SATA module and embedded NAND applications. It can supports 20/30/40+ nm MLC/SLC Large-Block NAND flash memory up to 32 chip enable capacity..
- IC Name = PS3105
- Spec = SATA II
- mDDR/DDR = Mandatory
- Capacity(Max) = 512 GB
- Channel(Max) = 8
- CE(Max) = 64
- AES Support = Yes
- Common Features = 1. S.M.A.R.T 2. NCQ/TRIM 3. Programmable RAM for firmware upgrade

Controller Highlights:
- Compatible with SATA specification Version 2.6
- Compatible with SATA I/II 1.5Gbps and 3Gbps interface
- Support 128/256MB Mobile-DDR Cache
- Support 1×8/ 2×8/ 4×8 Flash I/O
- Support 1×8 2×8 4×8 Flash I O
- Build-in hardware 28/32/48-bit ECC circuit (BCH)
- Support 1×8 2×8 4×8 Flash I O
- Program RAM (Program Upgradable)

Physical Characteristics:
- Fabricated in 90nm CMOS process
- Available in 324-pin BGA package
- Operating Voltage: 0.9~3.6 V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

NAND Flash Support:
- Supports 20/30/40nm+ flash
- Supports up to 32 Chip Enable pins
- Supports interleave-4, two plane and 8 channel Flash access
- Supports 1×8/2×8/4X8 Flash I/O
- Supports SLC/MLC large block (4k/8k page) NAND Flash Memory
- MLC NAND R/W speed up to 250/220 MB/s

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports model name information update


Product Name: PS3107

Фотография PHISON PS3107

Descriptions:
PHISON’s PS PS3107 SATA-to-Flash micro-controller specially designed for various types of SATA module and embedded NAND applications. It can support up to 10/20/30+ nm MLC/SLC Large-Block NAND flash memory with up to 16 chip-enables capacity.
- IC Name = PS3107
- Spec = SATA II
- mDDR/DDR = Optional
- Capacity(Max) = 128 GB
- Channel(Max) = 4
- CE(Max) = 16
- AES Support = No
- Common Features = 1. S.M.A.R.T 2. NCQ/TRIM 3. Programmable RAM for firmware upgrade

Controller Highlights:
- Compatible with SATA specification Version 2.6
- Compatible with SATA I/II 1.5Gbps and 3Gbps interface
- Support 32/64/128 DDRII Cache
- Built-in enhanced ECC circuit (BCH)
- Program RAM (Program Upgradable)

Physical Characteristics:
- Fabricated in 90nm CMOS process
- Available in 256-pin BGA package
- Available in 128-pin TQFP package
- Operating Voltage: 0.9 ~ 3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

NAND Flash Support:
- Supports 10/20/30+nm flash
- Supports up to 16 chip-enable pins
- Supports interleave, 2-plane and 4-channel Flash access
- Supports SLC/MLC large block (4k/8k page) NAND Flash Memory
- MLC NAND R/W speed up to 180/180 MB/s

Other Features:
- Built-in static and dynamic wear-leveling
- Power Saving implemented
- Supports model name information update


Product Name: PS3108

Фотография PHISON PS3108

Descriptions:
PHISON’s PS PS3108 SATA-to-Flash micro-controller specially designed for various types of SATA module and embedded NAND applications. It can support up to 10/20+ nm MLC/SLC Large-Block NAND flash memory with up to 64 chip-enables capacity.

Controller Highlights:
- Compatible with SATA 3.0 specification
- Compatible with SATA I/II/III 1.5G/ 3G/ 6Gbps interface
- Support 2Gb/4Gb DDRIII Cache
- Built-in enhanced up to 72bit/1KB ECC circuit (BCH)
- Program RAM (Program Upgradable)

Physical Characteristics:
- Fabricated in 55nm CMOS process
- Available 324-pin BGA package
- Operating Voltage: 0.9 ~ 3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

NAND Flash Support:
- Supports 10/20+nm flash
- Supports up to 64 chip-enable pins
- Supports interleave, 2-plane and 4-channel Flash access
- Supports SLC/MLC large block (8K/16K page) NAND Flash Memory
- MLC sequential R/W speed up to 500/300 MB/s

Other Features:
- Built-in static and dynamic wear-leveling
- Power Saving implemented
- Supports model name information update


Product Name: PS3109

Фотография PHISON PS3109

Descriptions:
Phison PS3109 SATA-to-Flash micro-controller specially designed for various types of SATA module and embedded NAND applications. It can support up to 10/20/30+ nm SLC/MLC Large-Block NAND flash memory with up to 16 chip-enable capacity.

Controller Highlights:
- Compatible with SATA specification Version 2.6
- Compatible with SATA I/II/III 1.5Gbps, 3Gbps, and 6Gbps interface
- Configurable with 8Mbytes/32Mbytes SDRAM memory
- Built-in enhanced ECC circuit (BCH)
- Program RAM (Program Upgradable)

Physical Characteristics:
- Fabricated in 55 nm CMOS process
- Available in 256-pin TFBGA package
- Operating Voltage : 3.0V~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

NAND Flash Support:
- Supports 10/20/30+nm flash
- Supports up to 16 chip-enable pins
- Supports interleave, 2-plane and 4-channel Flash access
- Supports SLC/MLC large block (4k/8k/16k page) NAND Flash Memory
- MLC NAND R/W speed up to 500/200 MB/s

Other Features:
- Built-in static and dynamic wear-leveling
- Power saving implemented
- Supports model name information update


SD\MMC


Product Name: PS8003

Фотография PHISON PS8003

Descriptions:
PHISON’s PS8003 SD-to-Flash micro-controller specially designed for SD Card and embedded NAND applications. PS8003 supports SPI and SD mode while extending the clock frequency to 50MHz for higher data transfer rate. The multiple bus-width (x1 bit, x4 bit) feature allows for host design flexibility and higher data tranfer bandwidth.

Controller Highlights:
- Complies with SD system specification version 1.01, 1.1, 2.0 and SDHC
- Pin-to-pin compatible with PS8000
- Build-in hardware 4-bit ECC circuit (Hamming & Reed-Solomon)
- Supports 70nm+ flash
- SLC flash Read/Write speed up to 23/18 MB/s
- MLC flash Read/Write speed up to 22/14 MB/s
- Achieve Class 6 with 1 SLC or 2 MLC
- Windows Vista certified

Physical Characteristics:
- Fabricated in 0.16um CMOS process
- Available in 51-Pin LGA package (3.0mm x 7.6mm x 0.7mm)
- Mask ROM
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

SD Interface:
- Supports SD/SPI mode
- 0-50MHz variable clock rate
- High performance flash memory control with dual SRAM buffer mode
- Integrated 80C51 compatible 8-bit microprocessor
- 1 clock per instruction cycle

NAND Flash Support:
- Supports 70nm+ flash
- Supports up to 4 Chip Enable pins
- Supports 1×8 and 2×8 Flash I/O
- Supports SLC large block (2k + 64Bytes per page) NAND Flash Memory
- Supports MLC large block (2k + 64Bytes per page) NAND Flash Memory
- SLC flash Read/Write speed up to 23/18 MB/s
- MLC flash Read/Write speed up to 22/14 MB/s

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports CPRM
- Supports VID, PID, serial number & vender information update
- Supports secure data storage


Product Name: PS8005

Фотография PHISON PS8005

Descriptions:
PHISON’s PS8005 SD-to-Flash micro-controller specially designed for SD Card and embedded NAND applications. With built-in BCH ECC up to 12-bit, PS8005 is capable of supporting 50+nm flash in SPI, eMMC, and SD mode. The entire firmware is upgradable thanks to the addition of Programmable RAM, allowing host design flexibility.

Controller Highlights:
- Complies with SD system specification version 1.01, 1.1, 2.0 and SDHC
- Pin-to-pin compatible with PS8001, PS8000
- Build-in hardware 6/9/12-bit ECC circuit (BCH)
- Supports 50nm+ flash
- Program RAM (Program Upgradable)
- SLC flash Read/Write speed up to 23/20 MB/s
- MLC flash Read/Write speed up to 22/14 MB/s
- Achieve Class 6 with 1 SLC or 2 MLC
- Windows Vista certified

Physical Characteristics:
- Fabricated in 0.16um CMOS process
- Available in 51-Pin LGA package (3.0mm x 7.6mm x 0.7mm)
- Program RAM (Program Upgradable)
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

SD Interface:
- Supports SD/MMC/SPI mode
- 0-50MHz variable clock rate
- High performance flash memory control with dual SRAM buffer mode
- Integrated 80C51 compatible 8-bit microprocessor
- 1 clock per instruction cycle

NAND Flash Support:
- Supports 50nm+ flash
- Supports up to 4 Chip Enable pins
- Supports 1×8 and 2×8 Flash I/O
- Supports SLC large block (2k/4k page) NAND Flash Memory
- Supports MLC large block (2k/4k page) NAND Flash Memory
- SLC flash Read/Write speed up to 23/20 MB/s
- MLC flash Read/Write speed up to 22/14 MB/s

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports CPRM
- Supports VID, PID, serial number & vender information update
- Supports secure data storage


Product Name: PS8030

Фотография PHISON PS8030

Descriptions:
PHISON’s PS8030 SD-to-Flash micro-controller specially designed for SD Card and embedded NAND applications. With built-in Enhanced BCH ECC, PS8030 is capable of supporting 20/30/40/50+nm flash in SPI and SD mode. The entire firmware is upgradable thanks to the addition of Programmable RAM, allowing host design flexibility.
- IC Name = PS8030
- Spec = SD 3.0
- Capacity (Max) = 64 GB
- Channel (Max) = 2
- CE (Max) = 4
- Speed class (Max) = 10
- Common Features = 1. Build-in Hardware Enhanced ECC Circuit (BCH)2. Program RAM (Program Upgradable)

Controller Highlights:
Complies with SD system specification version 3.0 and SDHC and SDXC
Build-in hardware Enhanced ECC circuit (BCH)
Program RAM (Program Upgradable)
Supports 2×8 Flash I/O
Achieve Class 10

Physical Characteristics:
- Fabricated in 0.11um CMOS process
- Available in 51-Pin LGA package (3.0mm x 7.6mm x 0.7mm)
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

SD Interface:
- Supports SD / SPI mode
- Support UHS-I (SDR/DDR50)
- High performance flash memory control with dual SRAM buffer mode

NAND Flash Support:
- Supports 20/30/40/50nm+ flash
- Supports up to 8 Chip Enable pins
- Supports MLC large block (4k/8k page) NAND Flash Memory
- MLC flash Read/Write speed up to 45/25 MB/s (Testmetrix)

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports CPRM
- Supports CID Register (serial number/PNM/MDT…..etc.) information update and customized.


Product Name: PS8032

Фотография PHISON PS8032

Descriptions:
PHISON’s PS8032 SD-to-Flash micro-controller specially designed for SD Card and embedded NAND applications. With built-in Enhanced BCH ECC, PS8032 is capable of supporting 20/30/40/50+nm flash in SPI and SD mode. The entire firmware is upgradable thanks to the addition of Programmable RAM, allowing host design flexibility.
- IC Name = PS8032
- Spec = SD 3.0
- Capacity (Max) = 64 GB
- Channel (Max) = 1
- CE (Max) = 4
- Speed class (Max) = 10
- Common Features = 3. Build-in both Static and Dynamic Wear-Leveling 4. Supports CPRM

Controller Highlights:
- Complies with SD system specification version 3.0 and SDHC
- Pin-to-pin compatible with PS8006, PS8007, PS8008, PS8009 and LGA51
- Build-in hardware Enhanced ECC circuit (BCH)
- Program RAM (Program Upgradable)
- Supports 1×8 Flash I/O
- Achieve Class 10

Physical Characteristics:
- Fabricated in 55nm CMOS process
- Available in 51-Pin LGA package (3.0mm x 7.6mm x 0.7mm)
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

SD Interface:
- Supports SD / SPI mode
- Support UHS-I (SDR/DDR50)
- High performance flash memory control with dual SRAM buffer mode

NAND Flash Support:
- Supports 20/30/40/50nm+ flash
- Supports up to 4 Chip Enable pins
- Supports MLC large block (4k/8k page) NAND Flash Memory
- MLC flash Read/Write speed up to 27/18 MB/s

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports CPRM
- Supports CID Register (serial number/PNM/MDT…..etc.) information update and customized.


Product Name: PS8035

Фотография PHISON PS8035

Descriptions:
PHISON’s PS8035 SD-to-Flash micro-controller specially designed for SD Card and embedded NAND applications. With built-in Enhanced BCH ECC, PS8035 is capable of supporting 1x/2x/3x/4xnm flash in SPI and SD mode. The entire firmware is upgradable thanks to the addition of Programmable RAM, allowing host design flexibility.
- IC Name = PS8035
- Spec = SD 3.0
- Capacity (Max) = 64GB
- Channel (Max) = 1
- CE (Max) = 4
- Speed class (Max) = 10
- Common Features = 5. Support SDR104 (PS8035 only)

Controller Highlights:
- Complies with SD system specification version 3.0 and SDHC/SDXC
- Pin-to-pin compatible with PS8006, PS8007, PS8008, PS8009 (Don’t support Toggle) & PS8032 (supporting Toggle)
- Build-in hardware Enhanced ECC circuit (BCH)
- Program RAM (Program Upgradable)
- Supports 1×8 Flash I/O
- Achieve Class 10

Physical Characteristics:
- Fabricated in 55nm CMOS process
- Available in 51-Pin LGA package (3.0mm x 7.6mm x 0.7mm)
- Operating Voltage: 2.7~3.6V
- Built-in Regulator that supports 3.3V Flash I/O

SD Interface:
- Supports SD / SPI mode
- Support UHS-I (SDR104/SDR50/DDR50)
- High performance flash memory control with dual SRAM buffer mode

NAND Flash Support:
- Supports 1x/2x/3x/4xnm and flash
- Supports up to 4 Chip Enable pins
- Supports MLC/TLC large block (4/8/16KB page) NAND Flash Memory
- MLC flash Read/Write speed up to 90/45 MB/s(MLC)& 90/85 MB/s(SLC/Ultra MLC)

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports CPRM
- Supports CID Register (serial number/PNM/MDT…..etc.) information update and customized.


Card Reader


ProductNo:PS2134DM

Фотография PHISON PS2134DM

CF Card/IDE DOM/PATA


Product Name: PS3006

Фотография PHISON PS3006

Descriptions:
PHISON’s PS3006 CF/IDE-to-Flash micro-controller specially designed for CF Card, IDE SSD, IDE DOM, and embedded NAND applications. It can supports 50+ nm MLC/SLC Large-Block NAND flash memory up to 16 chip enable capacity.

Controller Highlights:
- Compatible with CF/IDE specification Version 3.0
- Compatible with PC Card Standard Release specification Version 8.0
- Build-in hardware max of 12-bit ECC circuit (BCH)
- Program RAM (Program Upgradable)
- Supports 50nm+ flash
- Windows Vista certified and supports Readyboost

Physical Characteristics:
- Fabricated in 0.16um CMOS process
- Available in 100-Pin / 128-pin LQFP package and 85-BGA
- Programable RAM
- Operating Voltage: 2.7~5.5V
- Built-in Regulator that supports 3.3V/1.8V Flash I/O

CF/IDE Interface:
- Integrated PLL oscillator
- External 12MHz crystal
- 24K program SRAM, firmware upgradable
- Intel 8051 CPU

NAND Flash Support:
- Supports 50nm+ flash
- Supports up to 16 Chip Enable pins
- Supports 1×8/2×8 Flash I/O
- Supports SLC large block (512/2k/4k page) NAND Flash Memory
- Supports MLC large block (512/2k/4k page) NAND Flash Memory

Other Features:
- Build-in static and dynamic wear-leveling
- Power Saving implemented
- Supports VID, PID, serial number & vender information update
- Supports secure data storage


Product Name: PS3016-P8

Фотография PHISON PS3016-P8

Descriptions:
PHISON’s PS3016-P8 CF/IDE-to-Flash micro-controller is specifically designed for CF Card, IDE SSD, IDE module, and embedded NAND applications.
- IC Name = PS3016-P8
- Spec = CF5.0
- Mode = up to UDMA6
- Capacity(Max) = 128GB
- Flash = SLC/MLC 2/4/8KB
- Channel = 4
- Wear Leveling = Global
- Package = TQFP 128 / BGA 144
- Remark = 600X CF

Controller Highlights:
- Compatible with CF/IDE Specification Version 4.1
- Compatible with PC Card Standard Release specification Version 8.0
- Built-in hardware max of 48-bit ECC circuit (BCH)
- Programmable RAM (Program Upgradable)
- Support 1×8 2×8 4×8 Flash I O
- Supports 30nm+ flash

Physical Characteristics:
- Fabricated in 0.11um CMOS process
- Available in 128-pin TQFP package and 144-pin BGA package
- Programmable RAM / Firmware upgradable
- Operating voltage: 2.7 ~ 5.5V
- Built-in regulator that supports 3.3V/1.8V Flash I/O
- 8051 CPU

NAND Flash Support:
- Supports 30/40/50nm+ flash
- Supports up to 32 Chip Enable pins
- Supports 4-channel flash access
- Supports SLC (2k/4k/8K page) NAND Flash Memory
- Supports MLC (2k/4k/8K page) NAND Flash Memory

Other Features:
- Implemented with static and dynamic wear-leveling
- Power Saving implemented
- Supports customization in vender information
- Supports data protection and S.M.A.R.T. features


Product Name: PS3016-P9

Фотография PHISON PS3016-P9

- IC Name = PS3016-P9
- Spec = CF6.0
- Mode = up to UDMA7
- Capacity(Max) = 128GB
- Flash = SLC/MLC 4/8KB
- Channel = 4
- Wear Leveling = Global
- Package = BGA 144
- Remark = 800X CF


eMMC


Product Name: PS7000

Фотография PHISON PS7000

Descriptions:
e·MMC is an universal low cost data storage and communication media. It is designed to cover a wide area of applications as smart phones, cameras, organizers, PDAs, digital recorders, MP3 players, pagers, electronic toys, etc.
Phison provides world’s 1st eMMC4.41 solution. The MMC interface is compliant with JEDEC eMMC4.41 standard, which is backward compatible with MMC4.2, eMMC4.3 and eMMC4.4. Moreover, new functions of Background Operation, Enhance Reliable Write and High Priority Write are provided to meet the designs of nowadays mobile platforms.?
- IC Name = PS7000
- Spec = eMMC4.41
- Channel(max) = 2
- Flash = SLC/MLC 2/4/8K
- Support Voltage = 1.8/ 3.3V
- Package = LGA51
- ECC(max) = 24
- Remark = DDR52

Features:
- Three data bus width modes: 1-bit , 4-bit, and 8-bit
- Boot Operation Mode
- Enhanced Reliable Write
- Relay Protected Memory Block (RPMB)
- Write protection supported
- Variable clock rate 0 – 20MHz / 0 – 26MHz or 0 – 52MHz
- Multiple User Data Partition with Enhanced User Data Area options
- General Purpose Area Partitions
- High-Speed dual data rate transfer Multimedia card @52MHz
- Hardware reset
- High Priority Interrupt (HPI)
- Background operation

Capacity:
- 2G~32G

Package:
- Type I: 12 x 16 x 1.4mm 169 LBGA Ball
- Type II: 14 x 18 x 1.4mm 169 LBGA Ball ??4 channel flash access

Operation Voltage:
- Vcc (Flash core): 1.8V/3.3V
- VccQ (I/O): 1.2V/1.8V/3.3V


Product Name: PS8033

Фотография PHISON PS8033

Descriptions:
- IC Name = PS8033
- Spec = eMMC4.41
- Channel(max) = 2
- Flash = SLC/MLC/TLC/Toggle/ONFI 2/4/8/16K
- Support Voltage = 1.8/ 3.3V
- Package = LGA81
- ECC(max) = 72
- Remark = DDR 52

Features:
- 0.104um technology
- Support eMMC specification up to version 4.41+
- Version 4.5 feature supported: Power Off Notification, Background Operation, Packed Command, Discard, Sanitize
- NAND support: 8KB/page SLC, 4KB/page MLC, 8KB/page MLC/TLC, 16KB/page MLC, Toggle/ONFI interface
- Number of NAND: Up to 8CE total, up to 128GB
- Data bus width: 1/4/8-bit
- Default and Alternate Boot Modes
- Sleep/Awake (CMD5)
- Separated power supply for interface I/O and NAND voltages
- Block read and block write [Class 2 and Class 4]
- Erase [Class 5]
- Write Protection [Class 6]
- Lock Card [Class 7]
- Variable clock rate 0~20/0~26/0~52Mhz
- Maximum data rate up to 104MB/s
- High performance NAND control with dual SRAM buffer mode
- Dual voltage support: 1.7V~1.95V & 2.7V~3.6V
- ECC coverage: 72-bit/1KB
- Multiple user data partition with Enhanced user data area option
- General Purpose Area Partitions (GPAP)
- Replay Protected Memory Block (RPMB)
- Enhanced Write Protection with permanent and partial protection options
- Support hardware reset


Product Name: PS8210

Фотография PHISON PS8210

Descriptions:
- IC Name = PS8210
- Spec = eMMC4.5
- Channel(max) = 2
- Flash = SLC/MLC/TLC/Toggle/ONFI 2/4/8/16K
- Support Voltage = 1.8/ 3.3V
- Package = LGA81
- ECC(max) = 72
- Remark = HS-200

Features:
- 55nm technology
- Support eMMC specification up to version 4.5
- 4.5 features supported: Power Off Notification, Background Operation, Packed Command, Discard, Sanitize, Extended Partitions, Data Tag, Real Time Clock, Context Management
- NAND support: 8KB/page SLC, 4KB/page MLC, 8KB/page MLC/TLC, 16KB/page MLC, Toggle/ONFI interface
- Number of NAND: Up to 8CE total, up to 128GB
- Data bus width: 1/4/8-bit
- Default and Alternate Boot Modes
- Sleep/Awake (CMD5)
- Separated power supply for interface I/O and NAND voltages
- Block read and block write [Class 2 and Class 4]
- Erase [Class 5]
- Write Protection [Class 6]
- Lock Card [Class 7]
- Variable clock rate 0~20/0~26/0~52Mhz/0~200Mhz
- Maximum data rate up to 200MB/s
- High performance NAND control with dual SRAM buffer mode
- Dual voltage support: 1.7V~1.95V & 2.7V~3.6V
- ECC coverage: 72-bit/1KB
- Multiple user data partition with Enhanced user data area option
- General Purpose Area Partitions (GPAP)
- Replay Protected Memory Block (RPMB)
- Enhanced Write Protection with permanent and partial protection options
- Support hardware reset

Leave a Comment

Your email address will not be published. Required fields are marked *

* Copy This Password *

* Type Or Paste Password Here *